Manufacturing index plunges into contraction

PMI drops to 48.6% as new orders, production drag index below 50% for the first time in three years.

12/01/2015


PMI drops to 48.6% as new orders, production drag index below 50% for the first time in three years. Courtesy: CFE MediaThe Institute for Supply Management's (ISM) monthly PMI Index dropped below the 50% mark for the first time in three years on Dec. 1. The 48.6% reading for November is the first contraction in the manufacturing sector since November 2012, and continues a steady decline in the index. Analysts had predicted a slight increase in the November PMI, so the news Dec. 1 came as a shock.

After reaching 53.5% in June, the PMI has been on a steady decline, as a drop in oil prices has put pressure on those sectors that rely on growth in the oil market.

A drop in new orders, production and raw materials led to declines in 10 of the 18 industries surveyed by ISM. A softer global manufacturing economy also has weighed on the index, said Bradley Holcomb, chairman of the ISM's Manufacturing Business Survey Committee.Many of the underlying indexes for the overall PMI also declined in November. The New Orders Index plunged 4 percentage points from 52.9% to 48.9%, an 8% decline for the month. The Production Index also plummeted, falling from 52.9% to 49.2%, a decrease of 7.5%.

Only five manufacturing sectors surveyed by ISM reported growth in November: Printing & Related Support Activities; Nonmetallic Mineral Products; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; and Transportation Equipment. Ten industries reported contraction, including Apparel, Leather & Allied Products; Plastics & Rubber Products; Machinery; Primary Metals; Petroleum & Coal Products; Electrical Equipment, Appliances & Components; Computer & Electronic Products; Furniture & Related Products; Fabricated Metal Products; and Chemical Products.Comments from committee members reflected the impact of both domestic oil prices and global economic issues on the index. Among the comments:

  • "The oil and gas industry is realizing that [the] 'low' oil prices are now the new reality with expectations to continue at this level for some time." (Petroleum & Coal Products)
  • "Still seeing deflation in raw materials." (Chemical Products)
  • "Bookings and new orders are lower than expected." (Computer & Electronic Products)
  • "Automotive remains strong." (Fabricated Metal Products)
  • "Business is still good." (Transportation Equipment)
  • "Downturn in China and European markets are negatively affecting our business." (Machinery)
  • "Strong dollar is slowing our sales to China as they can buy in Europe." (Primary Metals)
  • "Incoming orders have leveled off from the summer." (Furniture & Related Products)
  • "Month-over-month conditions are stable." (Food, Beverage & Tobacco Products)


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me