Manufacturing growth rebounds after summer slump

ISM report jumps above 50% level for first time since May as new orders expand

10/02/2012


For the first time since May, the Institute for Supply Management’s closely-watched PMI Index jumped past the 50 mark in September. That indicates expansion in the manufacturing sector. New orders and employment also were sharply higher for the first time this summer and sparked renewed optimism in manufacturing after a quarter of sluggish activity.

The 51.5 percent level for the PMI was 1.9 percentage points higher than August’s 49.6 figure, the largest single-month percentage point increase in more than a year. The New Orders Index registered 52.3 %, an increase of 5.2 percentage points from August, indicating growth in new orders after three consecutive months of contraction. The Production Index registered 49.5 %, an increase of 2.3 percentage points and indicating contraction in production for the second time since May 2009. The Employment Index increased by 3.1 percentage points, registering 54.7 percent. The Prices Index increased 4 percentage points from its August reading to 58%.

“Comments from the panel reflect a mix of optimism over new orders beginning to pick up, and continued concern over soft global business conditions and an unsettled political environment,” said Bradley J. Holcomb, chair of the Institute for Supply Management Manufacturing Business Survey Committee.”

Among those comments from ISM respondents:

  • "Appears that our so-called 'slowdown' was a summer thing. September brings with it increasing requirements and business." (Paper Products)
  • "Business improved through Q3, but is beginning to show signs of slowing down in Q4; this has been a typical trend over the last few years." (Wood Products)
  • "Business has picked up going into the last quarter." (Plastics & Rubber Products)
  • "We are sticking to our manufacturing plan, but have slowed production down considerably. Haven't added any new units to the 2012 plan, and still have no forecast for 2013 released." (Computer & Electronic Products)
  • "Sales have tanked over the last two months, bringing a very concerned and stressed management team. Not very optimistic for the near-term future." (Apparel, Leather & Allied Products)
  • "Uncertainty in the healthcare legislation (reform) continues to be the underlying force keeping our sales revenue below its full potential." (Miscellaneous Manufacturing) 

According to Holcomb, a PMI above 42.6 %, "Over a period of time, generally indicates an expansion of the overall economy. Therefore, the September PMI indicates growth for the 40th consecutive month in the overall economy, and indicates a return to growth in the manufacturing sector following three consecutive months of slight contraction."

THE LAST 12 MONTHS

Month

 

PMI™

 

 

 

Month

 

PMI™

 

Sep 2012

 

51.5

 

 

 

Mar 2012

 

53.4

 

Aug 2012

 

49.6

 

 

 

Feb 2012

 

52.4

 

Jul 2012

 

49.8

 

 

 

Jan 2012

 

54.1

 

Jun 2012

 

49.7

 

 

 

Dec 2011

 

53.1

 

May 2012

 

53.5

 

 

 

Nov 2011

 

52.2

 

Apr 2012

 

54.8

 

 

 

Oct 2011

 

51.8

 

Average for 12 months – 52.2
High – 54.8
Low – 49.6

 


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me