Manufacturing growth keeps blazing through 2017

PMI slips to 58.2% in November, but index is well above 10% growth rate for the year

12/01/2017


Image courtesy: CFE MediaManufacturing’s hot streak continued in November, as the monthly PMI Index from the Institute for Supply Management remains above the 10% growth rate for the sixth consecutive month.

The November PMI checked in at 58.2%, down 0.5 percentage points from October’s 58.7 reading, but still solidly ahead of the 50% rating that signifies manufacturing growth. In fact, the PMI has been above the 55% level throughout 2017 with the exception of April and May, where it sat is 54.8% and 54.9% respectively. Since then, it never has been lower than July’s 56.3% reading, and is averaging 57.4% for the year.

“Comments from the panel reflect expanding business conditions, with New Orders and Production leading gains, employment expanding at a slower rate, order backlogs stable and expanding, and export orders all continuing to grow in November,” said Timothy R. Fiore, chairman of the Institute for Supply Management Manufacturing Business Survey Committee. “Supplier deliveries continued to slow, but at slower rates, and inventories continued to contract during the period. Price increases continued, but at a slower rate. The Customers’ Inventories Index improved but remains at low levels."

Committee members are not just satisfied with the current PMI levels, but also remain bullish for manufacturing as they look toward 2018. Among the committee comments”

  • "Continuing to see more orders for the next six to 12 months." (Chemical Products)
  • "Strong sales through third and now fourth quarters. Backlog increasing, and capacity at suppliers tightening." (Machinery)
  • "Business has leveled out but remains strong heading into the end of the year." (Computer & Electronic Products)
  • "We are just coming off a record sales year. We expect to continue in 2018 robust activity." (Miscellaneous Manufacturing)
  • "We are seeing steady, consistent demand for end of year. We usually see a slowdown, which we haven’t seen yet." (Fabricated Metal Products)
  • "Overall industry demand remains strong. Continue to have a healthy backlog of orders. Local economy is also strong, with a fairly tight labor market." (Transportation Equipment)
  • "Business is strong. Employment is tight. Supplier deliveries have lengthened. A few suppliers are still blaming Hurricane Harvey for the lead times." (Food, Beverage & Tobacco Products)
  • "Strong season demand for products and continued requirements for uptime." (Nonmetallic Mineral Products)
  • "Currently, we have not experienced the typical seasonal slowdown toward the end of Q4. Could be that there is a lot of optimism in the American economy." (Plastics & Rubber Products)

Bob Vavra is content manager of Plant Engineering at CFE Media.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me