Manufacturing forecast: Executive summary

An executive summary of the new report commissioned by MAPI and The Aspen Institute on how policy changes could affect manufacturing in the coming decade.

04/01/2013


The following is the executive summary of the new report commissioned by MAPI and The Aspen Institute on how policy changes could affect manufacturing in the coming decade:

The Aspen Institute’s program on Manufacturing and Society in the 21st Century and MAPI commissioned an econometric forecast to determine how the U.S. economy would change if it were to achieve the manufacturing resurgence which has been widely touted in recent years. The importance of such a resurgence is that it very well could lead to higher growth over time, higher standards of living, and a reduction or reversal of the chronic balance of payments deficit which is shifting resources outside the country.

Achieving this result, the modeling shows, requires certain policy choices which are not radically different from current trends. The University of Maryland’s Interindustry Forecasting Project (Inforum) was commissioned to make projections based on a target of moving manufacturing’s share of GDP back to the level last seen in 1998 (around 15%), before the “dot-com” recession and the Great Recession. Various scenarios were also tested to determine what economic trends could power such a change. Finally, policy levers which could support the trend were outlined.

Results were projected to 2025. With the right policies in place, the manufacturing share of value added in the resurgence scenario grew to 15.8% of GDP, compared to 11.6% in 2012 and 11.1% in 2025 under a “business as usual” baseline forecast. Under the resurgence scenario, real manufacturing output is over $1.5 trillion higher than in the baseline scenario, and overall GDP grows by a similar magnitude. To achieve such a growth path, investment in equipment and software is 12.1% higher in 2025 relative to the baseline, and the mining sector (driven by the natural gas boom) gains 1% of GDP (over $300 billion in output). Other major sectors of the economy are necessarily smaller under the resurgence scenario. Personal consumption expenditures, notably, are over 3.2% lower in the resurgence scenario, signaling a shift in the economy toward investment and goods production for export and away from domestic consumption. Due to higher productivity in services, in turn partially powered by gains derived from new manufacturing processes and products, the services sector loses some relative share of total GDP. Government services also loses about 2.2% of its share of GDP. Services and government do not decline in real terms, but grow more slowly than manufacturing.

Two other significant changes under the resurgence scenario are the creation of about 3.7 million new jobs directly in manufacturing, when compared to the baseline, and a reversal of the trade deficit in manufacturing. Direct employment in manufacturing rises to a level of over 16.3 million jobs, compared to 12.3 million in 2012 and about 17.6 million in 1998. Exports grow significantly faster than imports in the resurgence scenario, reaching a positive trade balance by 2024. Exports grow at an annual rate of 8.1percent in our resurgence scenario, while imports grow at 2.5%. Growth in exports is driven by energy-intensive industries, such as chemicals, plastics, fabricated metals, and steel; and capital goods, such as computers, engines, turbines, and power equipment, aerospace equipment, and industrial products. Semiconductors and pharmaceuticals also grow faster than average exports.

Major policy directions which could support achievement of the resurgence scenario are:

  • Trade Policy: complete more trade-opening agreements, such as the current negotiations with Asia and Europe; combat “competitive currency devaluations”; and work to achieve global macroeconomic stability.
  • Energy Policy: sustain current energy boom in oil and gas production; improve electric grid to allow development of new sources of power generation, such as wind and solar; support more efficient use of energy through conservation efforts.
  • Regulatory Policy: reduce overlapping and layered regulations through regulatory forbearance, elimination of duplicative regulations, and more rigorous review of costs and impacts of new regulations; and use trade negotiations to reduce costs of and impediments to trade by converging or harmonizing regulations.
  • Manufacturing Labor Force: improve K-12 performance, including science, technology, engineering, and mathematics (STEM) education; develop nationally recognized skills certification programs and certificates; expand and improve apprenticeship and vocational education programs; encourage entry of non-traditional demographic groups to manufacturing positions and skills; reduce barriers to entry in professional fields related to manufacturing; and reform immigration to support permanent work status for skilled workers, engineers, and research personnel.
  • Tax Policy: Reduce corporate taxes to OECD average levels; adopt territorial tax regimes; expand and improve R&E tax credit and investment expensing options; and exercise care in any tax reform not to burden “pass-through” firms with new tax obligations on top of the personal income tax increases adopted in 2013.
  • Basic and Applied Research: Expand federal support for basic and applied research applied research in fields important to manufacturing, i.e., engineering, mathematics, and physical sciences.


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me