Manufacturing ends 2017 with another strong performance

PMI jumps to 59.7% in December and finishes the year up more than 15%.

01/03/2018


Image courtesy: Bob VavraManufacturing ended 2017 with a surge that matched the increase in retail spending at Christmas. The monthly PMI Index from the Institute for Supply Management (ISM) jumped 1.5 percentage points to 59.7% in December, reversing a small decline in the previous two months and tickling the 60.0% mark that would indicate growth 20% above the baseline average.

The New Orders Index jumped 5.4 percentage points in December to 69.4%, leading a series of indicators that pointed toward continued strength in the manufacturing sector.

“Comments from the panel reflect expanding business conditions, with new orders and production leading gains; employment expanding at a slower rate; order backlogs expanding at a faster rate; and export orders and imports continuing to grow in December,” said Timothy, Fiore, chairman of the ISM’s Manufacturing Business Survey Committee. “Supplier deliveries continued to slow (improving) at a faster rate, and inventories continued to contract at a slower rate during the period. Price increases continued at a faster rate.”

The comments from committee members reflected a general confidence about the health of the sector, and pointed toward a strong start to 2018. Among the comments:

    PMI over the last 12 months.

  • “Our business is moving higher into the new year. Increased sales are resulting in increased purchases of CapEx and raw materials.” (Chemical Products)
  • “Strong international sales — Europe and Australia — versus last two years. U.S. sales continue to grow. Seeing commodity pricing pressures.” (Machinery)
  • “We are seeing a ramp-up with companies releasing early 2018 spend now.” (Computer & Electronic Products)
  • “Business conditions are good; we are tracking well to our projections for the year.” (Miscellaneous Manufacturing)
  • “First quarter 2018 probably will be better than the fourth quarter 2017.” (Fabricated Metal Products)
  • “Domestic and international sales on the rise.” (Transportation Equipment)
  • “Economy (is) strong and business is strong, yet signals of headwinds in 2018 are persistent.” (Food, Beverage & Tobacco Products)
  • “All suppliers are reporting strong business activity and difficulties obtaining qualified employees.” (Paper Products)
  • “Demand at this time is strong in the construction part of our business. I think it is due to the impact of the hurricanes and the rebuild and new construction that is required.” (Plastics & Rubber Products)

The PMI’s December reading what the 16th straight month the index finished above the 50% threshold for growth, and was the seventh straight month the index topped 55%, indicating 10% growth for manufacturing. For the year, the PMI averaged more than 15% growth, with the average PMI coming in at 57.6%.

Bob Vavra is the content manager for Plant Engineering.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me