Manufacturing centers to focus on digital design, metal alloys

Obama to announce Feb. 25 that Chicago and Detroit won the bidding to host the public-private partnerships for manufacturing innovation

02/24/2014


The expected announcement Tuesday of two manufacturing innovation institutes in Chicago and Detroit will continue the Obama Administration’s emphasis on high-tech manufacturing while creating a public-private partnership to deliver funding and existing technology.

White House officials were quoted as saying the partnership allows funding for “key technology areas that encourage investment and production in the U.S."

After a 10-month competition among cities to provide a home for these high-tech centers, Detroit’s manufacturing innovation center will focus on developing lightweight allows and metals, while the Chicago innovation center will focus on digital manufacturing. Each center is being funded with $70 million in Department of Defense funding and $70 from private corporations.

Among the companies mentioned in news reports as being part of these private funding sources are EWI, an Ohio-based research company in the metals industry for the Detroit project, and companies such as Siemens, Dow Chemical, Lockheed Martin and General Electric for the digital manufacturing center in Chicago.

When the competition for these high tech centers began, White House officials said the centers would “serve as a regional hub designed to bridge the gap between basic research and product development, bringing together companies, universities and community colleges, and Federal agencies to co-invest in technology areas that encourage investment and production in the U.S.”

The first two such facilities already are in motion. In August 2012, Obama announced creation of the National Additive Manufacturing Innovation Institute in Youngstown, Ohio. In January 2014, he announced the creation of a power electronics hub in Raleigh, N.C. funded through the U.S. Department of Energy.

The implications for the innovation centers extend beyond just the manufacturing sector. While the digital manufacturing center “will raise the global competitiveness of U.S. small- and medium-sized manufacturers by smart and comprehensive use of the ‘digital thread’ throughout design, production and support” the Defense Department officials said it will benefit from such a consortium.

“The department requires complex, highly integrated systems to gain technological advantage, but it lacks the open market or volume to push costs or cycle times lower,” officials said in a white paper overview of the plan. It said the digital manufacturing design center would “help drive a paradigm shift in the development, production and sustainability of complex weapons systems by reducing acquisition lead time and costs through the application of digitally networked and synchronized processes and tools.”

For more on each of the innovations centers:

•  Digital Manufacturing and Design Innovation
•  Lightweight and Modern Metals Manufacturing
• Next Generation Power Electronics Manufacturing



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me