Manufacturers cut $1 billion in energy costs through Better Plants program

Department of Energy honors 120 manufacturers for achieving program goals to cut costs, emissions

09/25/2013


The Energy Department today recognized more than 120 manufacturers that are making smart investments to save on energy costs, cut greenhouse gas emissions and improve their bottom lines. Through the Department’s Better Buildings, Better Plants Program, over 1,750 plants across the United States have saved about $1 billion in energy costs and approximately 190 trillion BTUs– equivalent to about 11 million metric tons of COemissions.

During keynote remarks at the World Energy Engineering Congress today in Washington, D.C., Deputy Assistant Secretary for Energy Efficiency Kathleen Hogan praised Better Plants partners for their energy efficiency accomplishments and welcomed 12 new companies that joined the program over the last year.

“Through the Better Plants program, American manufacturers are cutting energy waste and saving millions of dollars each year,” said Deputy Assistant Secretary for Energy Efficiency Kathleen Hogan. “These manufacturers are leading by example – demonstrating the promise of energy efficiency, increasing competitiveness in the private sector and reducing harmful carbon pollution.”

Across the United States, manufacturers spend more than $200 billion each year to power their plants. Through the Energy Department’s Better Plants Program, American manufacturers sign a voluntary pledge to reduce energy intensity by about 25% over 10 years, or an equally ambitious level for their sector. To date, participating companies represent nearly 8% of the total U.S. manufacturing energy footprint. These partners also consume close to 15% of the U.S. chemical manufacturing sector’s energy use and 23% of energy used across the nation’s transportation equipment manufacturing industry.

At the World Energy Engineering Congress, Deputy Assistant Secretary Hogan also recognized five companies – AT&T, Cummins, Metal Industries, TE Connectivity and United Technologies Corporation – for exceeding their 25% energy intensity reduction goal. Along with the other Better Plants participants, these companies are modeling cost-effective energy management practices that save money and strengthen the competitiveness of U.S. manufacturing. The Better Plants program supports the Energy Department’s Clean Energy Manufacturing Initiative – a cross-cutting effort to ensure U.S. manufacturers remain competitive in the global marketplace.

Thirteen U.S. manufacturers have stepped up to the Better Plants Challenge – the industrial component of the Better Buildings Challenge – to achieve portfolio-wide energy savings and share successful strategies that maximize efficiency and help overcome financial and technical barriers across the marketplace.

More information about the Better Buildings, Better Plants Program 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me