Making the electrical grid smarter

The Department of Energy's effort to modernize the U.S. electrical grid is headed by the Office of Electricity Delivery and Energy Reliability. The office's multi-agency Smart Grid Task Force is responsible for coordinating standards development, guiding R&D projects and reconciling the agendas of a wide range of stakeholders.

01/01/2009


The Department of Energy 's effort to modernize the U.S. electrical grid is headed by the Office of Electricity Delivery and Energy Reliability. The office's multi-agency Smart Grid Task Force is responsible for coordinating standards development, guiding R&D projects and reconciling the agendas of a wide range of stakeholders.

The basic concept of Smart Grid is to add monitoring, analysis, control and communication capabilities to the national electrical delivery system to maximize the throughput of the system while reducing the energy consumption, according to NEMA. “The Smart Grid will allow utilities to move electricity around the system as efficiency and economically as possible. It will also allow the homeowner and business to use electricity as economically as possible.”

The nation's electrical grid delivers electricity from utilities where it is generated to consumers through two primary systems: the transmission system and the distribution system. The transmission system delivers electricity from power plants to distribution substations; the distribution system delivers electricity from distribution substations to consumers.

The grid also includes many local networks that use distributed energy resources to handle local loads and meet application requirements for remote power, district power and critical load protection.

According to the U.S. Department of Energy, its Grid 2030 vision, calls for the “construction of a 21st century electric system that connects everyone to abundant, affordable, clean, efficient and reliable electric power anytime, anywhere.”

This can be achieved “through a smart grid, which would integrate advanced functions into the nation's electric grid to enhance reliability, efficiency and security, and would also contribute to the climate change strategic goal of reducing carbon emissions. These advancements will be achieved by modernizing the electric grid with information-age technologies, such as microprocessors, communications, advanced computing and information technologies.”

SmartGridCity getting connected in Boulder

The design phase is complete, equipment is ordered and construction has started on SmartGridCity in Boulder, CO.

SmartGridCity is a multi-phase project to be complete in December. The potential benefits of SmartGridCity include operational savings, customer-choice energy management, better grid reliability, greater energy efficiency and conservation options, increased use of renewable energy sources and support for plug-in hybrid electric vehicles.

In April, Xcel Energy and its Smart Grid Consortium partners completed a study of Boulder's electrical infrastructure. In May, the company began implementation of the Smart Grid network and construction on the SmartGridCity Control and Operations Center.

“We're on our way toward building the grid of the future and making SmartGridCity a reality,” said Dick Kelly, Xcel Energy chairman, president and CEO. “This is a forward-thinking project that will transform the way we do business. In SmartGridCity, our customers will have more information, including the tools to communicate directly with us, and will choose when and how they use their energy based on price, generating resource or convenience.”

Phase I included full-system automation, monitoring and smart meters for the first group of SmartGridCity customers. It involved upgrades to two substations, five feeders and nearly 15,000 meters in Boulder. Phase II includes installation of a distribution and communication network for remaining areas within Boulder and enabling of Web portal access to all SmartGridCity customers.

Xcel Energy and its partners have started installing the high-speed communications network and Smart Grid sensing equipment necessary for deploying SmartGridCity, which will enable two-way communication between customers and the company.

Total electricity consumption is expected to decline in 2009 due to the slow growth in new housing construction and reduced demand in the industrial sector.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me