Maintenance must take lead in machine guarding checks

In a letter to the editor, Chris Mumford from ManagerPlus argues that establishing a thorough preventive maintenance checklist is vital to improve safety.

11/18/2013


At first glance, OSHA’s list of the Top 10 most common citations for 2013 seems to convey good news for machine guarding violations: they have dropped four spots from sixth to 10th compared to last year. Deeper analysis, however, reveals that this drop in rank masks the fact that machine guarding infractions have actually increased by 28 percent over the past year.

The drop in rank is actually just a case of bad news hidden among worse—there were approximately 56% more citations overall in 2013 compared to 2012 among the top ten categories.

So what accounts for the rise? Regulations and the governmental agencies responsible for enforcing them tend to be in constant flux. The recent shutdown of the U.S. Federal Government, for example, forced OSHA to furlough 90% of its inspectors and created a sizeable backlog of un-enforced cases.

But the nature of machine guarding regulations suggests that something else may be at work. Guards, electronic shutoffs, and other measures are put in place to protect workers from hazards “created by point of operation, ingoing nip points, rotating parts, flying chips and sparks,” according to OSHA’s official regulations. 

So companies must either be failing to fit new equipment with the proper safety devices, or neglecting maintenance on safeguards that are already in place. Identifying the cause of these violations is no small matter, as these incidents are considered particularly serious and carry some of the OSHA’s heftiest fines.

A manufacturing firm in Fort Worth Texas was slapped with 17 violations amounting to $88,000 in fines—13 of which stemmed from safety infractions like failing to equip a lathe with a foot guarding device. In another case, unguarded winding machines caused four employees to fracture their arms at a plastics manufacturing plant, resulting in $81,000 worth of fines for the company responsible.    

Given the regulatory burden already facing manufacturers, it’s not necessarily hard to imagine why machine guarding tends to be overlooked: once safeguards are in place, the focus shifts toward other, more pressing needs. Companies may even consider efforts beyond the initial installation of machine guards to be a waste of resources.  

This mentality will have to change, however, if companies hope to reverse the upward trend in these violations and avoid the fines and legal headaches associated with them. Establishing a thorough preventive maintenance checklist is a critical first step.

Implementing checks of machine guards into a preventive maintenance routine is the best way to ensure that they do not slip through the cracks. Having the maintenance staff check machine guards while performing related inspections or fixes is an efficient way to make ensure that they get done without expending excess resources.

Tracking these checks in a solid book of record provides an additional layer of protection for companies, enabling them to readily prove due diligence if needed.

Regardless of the solutions companies use to address the issue, deploying them in an organized, efficient manner is the best way to prevent them from falling by the wayside in the future.    



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me