Machine Safety in the US – What Drives Safety Behavior?

01/08/2010


Machine safety standards abound here in the US.  And of course we also have OSHA regulations which form the basis for Federal enforcement. Book shelves are loaded with books and publications with the single theme of addressing these two sentences. We also have employee injuries & insurance companies, productivity & operating efficiencies, the legal thing, and just plain “Best Practices”….to mention a few.  With all that said and for any company in the US, what drives domestic machine safety behavior?  Let me offer one opinion.

In my forty plus years of experience I would offer the following generalized priority:

  1. OSHA Regulations - because it’s the law, local regulations (i.e.: state, city, municipality, etc.), business demands/policy, and perhaps the legal threat.
  2. US based consensus standards, performance requirements in a purchase order, cost savings programs, and company safety policies.
  3. International standards influence, best practices, competition, and image.

The purpose of this list is not to be absolutely accurate, but instead, to drive some thinking as to where a new international standard like EN ISO 13849-1; 2006 plays a role in my business. Will this standard likely drive domestic safety behavior? Let’s take a quick look.

  1. Will OSHA or any local regulations, for enforcement of Regulations, reference EN ISO 13849-1; 2006?
  2. Is it likely that all US consensus standards will change policy this year from “informative references” to “normative (required) references” to international standards?
  3. Or, will the new requirements of EN ISO 13849-1; 2006 more likely fall into priority #3 above for most domestic companies?

To answer these questions one probably needs to look at your segment of the US discrete (machine) industry. Some of the segments are: large, medium, or small companies; end users vs machine builders, union vs non-union shops, European customers - yes or no, international plant locations vs only US…and the list goes on. There’s an interesting discussion going on at the “Safety Automation Forum” on this subject. You may want to check it out - http://www.linkedin.com/groupAnswers?viewQuestionAndAnswers&discussionID=10399199&gid=1950912&commentID=10092116&trk=view_disc

Another related article can be located at - http://www.controleng.com/article/443069-European_safety_deadline_extended_but_don_t_wait_Rockwell_Automation.php

There will be a lot more said on this subject over the next several months!

For more on Machine Safety visit: www.jbtitus.com

Posted by J.B. Titus on January 8, 2010



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me