Machine Safety: ANSI Z10-2005 is a concern and an opportunity

ANSI Occupational Health and Safety Management Systems standard ANSI Z10-2005 was updated, and the update approved on Sept. 5, 2012. This remarkable accomplishment created a national consensus standard for all types of organizations and companies regardless of size. A standard is not a guideline, and it carries compliance requirements. OSHA says ignorance of a regulation or standard is not an acceptable excuse.

07/02/2014


ANSI approved Occupational Health and Safety Management Systems, ANSI Z10-2005, on July 25, 2005. It was updated, and the update was approved on Sept. 5, 2012. This remarkable accomplishment created a national consensus standard for organizations and companies regardless of size. A standard is not a guideline, and it carries compliance requirements. This may understandably involve concerns, but what opportunities are in ANSI Z10?

ANSI Occupational Health and Safety Management Systems, ANSI Z10Concerns don't limit themselves to compliance requirements, in my opinion. I believe most of us understand that a lot of organizations don’t have “best-in-class” safety and health management systems in place within their operations. Having said that, there is a regulatory and/or legal expectation that all organizations/companies will have knowledge of any and all required compliance standards related to their applications. Therefore, “best-in-class” safety and health management does not matter in this case. Most often, potential citations and litigation boil down to compliance. According to OSHA, ignorance of a regulation or standard is not an acceptable excuse.

Opportunities related to ANSI Z10

Okay, what about opportunity? As an organization or supplier (consultant, original equipment manufacturer [OEM], systems integrator, etc.), implementing and complying with ANSI Z10 can be a cost effective key portion of an effective safety and health management system. As an “A” level performance standard applying “shall” language for compliance, doesn’t this standard set a high water mark in a safety culture? Yes, and an effective safety and health management system can be structured around ANSI Z10. There are a lot of details included in ANSI Z10, but I tend to generalize key requirements as follows:

  • Identify and mitigate hazards during the design phase and when changes are implemented:

      o Conduct safety design reviews for all new and/or altered machines and facilities

      o Utilize a change management process to identify and mitigate hazards and risks

  • Complete consistent assessments of risk(s) for all identified hazards

  • Adopt and utilize the hierarchy of controls for mitigating hazards recognizing the “safety through design” principle in the initial steps

  • Initiate actions to avoid inserting hazards via the procurement process for materials, machinery or facilities

  • All of the above is a continuous process

I’m sure you’ll agree that these general concepts, and the additional details of ANSI Z10, represent a compelling safety culture offering an opportunity for risk reduction, fewer employee injuries and reduced operational costs. In a perfect world, if all U.S. organizations and companies were in compliance with ANSI Z10 maybe we could actually achieve the ultimate safety and health management system.

What's your level of familiarity with ANSI Z10? Do you have any questions about it's application? Do you have some specific machine safety topic or interest that we could cover in future blog posts? Add your comments, thoughts, questions, or experiences in the comments section below.

Related articles:

ANSI Z10-2012, Occupational Health and Safety Management Systems

Three stages for implementing arc hazard protection: Part 3

Machine Safety: Is your safety culture a top-down approach?

Machine Safety Culture: Compliance versus cooperation driven

Contact: www.jbtitus.com for “Solutions for Machine Safety.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me