Machine Safety and “reasonably foreseeable misuse”

02/12/2010


In the world of machine safety it is commonly understood today that a risk analysis is required by the supplier and/or end user to identify and mitigate all hazards to acceptable levels. We get numerous questions on this process around the question of how to address the intent of the term “reasonably foreseeable misuse”? This term is actually defined in ANSI B11 - 2008, approved August 4, 2008 on page 16, clause 3.58 as: “reasonably foreseeable misuse:  The use of a machine in a way not intended by the supplier or user, but which may result from readily predictable human behavior.”  Furthermore, one can also find in Wikipedia a very thorough discussion with legal slant : http://en.wikipedia.org/wiki/Negligence.

However, in the machine tool industry it mostly has to do with human behavior and applying thought to predicting certain possible actions.  Quite commonly the life cycle of a machine is taken into account in identifying tasks and hazards as part of the risk assessment process because hazards not identified can create substantial unknown risks.  The standards also say that reasonably foreseeable hazards that are not related to tasks shall also be identified. Some given examples often include “explosive environments, noise, instability, equipment failures or operational errors such as using an inappropriately sized workpiece, mechanical failure of a chuck, operating at incorrect speed, etc.”

In addressing questions like this - [what is the intent of the term “reasonable foreseeable misuse?”] - my advice is always:

  • Look up the term in several US machine tool standards
  • Research the term on the internet
  • Remember - interpretation is almost always required

Some additional background information can be found at the following links:

www.productsafetyletter.com/news/5569-1.html

Before sale of a new product, every manufacturer should engage in a risk assessment of its product. Risk assessment has been described as

… a tool for manufacturers to identify possible hazards and provide a basis for considering alternative designs to mitigate or control risks. A risk assessment offers the opportunity to identify hazards associated with intended uses and reasonably foreseeable misuses, and to take steps to eliminate or control them before an injury occurs. This process can be a key factor in successfully reducing risks to an acceptable level.

Ross and Main, Risk Assessment and Product Liability, For the Defense, April 2001.

http://www.mwponline.com/Production_Zones/Retrofit_Service_Back_up/New_Machinery_Directive

www.consumerfed.org/elements/www.consumerfed.org/file/health/Congressional_Intent%20_of_CPSC_3_pager_1.pdf

For more on Machine Safety visit: www.jbtitus.com

Posted by J.B. Titus on February 12, 2010



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me