Lowering technology barriers could save manufacturers $100 billion

NIST study finds smart manufacturing, robotics show greatest potential.

12/02/2016


NIST engineer Jeremy Marvel adjusts a robotic arm used to study human-robot interactions. According to a NIST economic study on advanced robotics and automation—one of four reports on advanced manufacturing—Marvel’s work is the type of research needed toIdentifying what it called "gaps in the technological infrastructure," a recent report by the National Institute of Standards and Technology (NIST) found that manufacturing could save more than $100 billion annually by implementing more advanced manufacturing strategies and systems.

In a joint project with international research institute RTI International, NIST officials said the lack of measurement science and what it called "proof of concept" for the emerging technologies is costing U.S. manufacturing money and delaying the benefits that could be realized by the implementations.

"Gaps in the technology infrastructure-including the lack of reliable measurement and test methods, scientifically based standards, and other formal knowledge and tools-limit advanced manufacturing's further development and adoption," said NIST economist Gary Anderson, who coordinated the economic studies, in a press release.

The study found three keys areas where technologies barriers need to be lowered.

They include:

Keeping standards and performance measures nonproprietary.

Using public research institutions to develop those tools.

Working with manufacturing research groups and technology extension service to "ensure that all manufacturers-especially small- and medium-sized enterprises-can access them."

The study identified significant savings in more rapid advancement of technologies. The two largest potential areas of cost savings and production improvements are in robotics and in smart manufacturing, which NIST defined as using electronically exchanged and processed manufacturing data from design to finished product.

The overall cost savings are

  • Smart manufacturing: $57.4 billion, 3.2% reduction in production costs.
  • Advanced robotics and automation: $40.1 billion, 5.3 % reduction in production costs.
  • Additive manufacturing: $4.1 billion, 18.3% reduction in production costs
  • Roll-to-roll manufacturing: $400 million, 14.7% reduction in production costs.

In studying each of those four areas, researchers identified up to 10 critical barriers to technology adoption and looked at what eliminating those barriers might accomplish.

Anderson said that as impressive as the basic numbers might be on the surface, they actually may be conservative, since they evaluated only the direct benefits of reducing such barriers. "If we consider the larger-scale outcomes brought about by meeting these needs-such as new and improved products, increased production quality, long-term industry growth and job creation-the impacts would be significantly higher," Anderson said. "Our studies emphasize that full economic impact will only be realized if all technical needs are met, and all stakeholders regardless of size, not just large manufacturers, can share in the rewards."

-Bob Vavra, content manager, CFE Media



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me