Logistics show to co-locate with Hannover Messe in 2018

CeMAT Show to expand reach of even-year trade event in Germany.

06/02/2016


In 2018, the global logistics show CeMAT will co-locate with Hannover Messe to create an international trade event that will feature manufacturing and supply chain logistics. Image courtesy: Hannover Messe.After the success of the 2016 Hannover Messe, trade show officials have expanded the reach of the world's largest industrial trade show.

In even-numbered show years beginning in 2018, Hannover Messe will be co-located with CeMAT, the industrial logistics and supply main management show also produced by parent company Deutsche Messe. The 2018 show will be April 23-27 in Hannover, Germany, and the 2017 Hannover Messe will be held April 24-28. CFE Media is a media partner with Hannover Messe.

In odd-numbered years, Hannover Messe includes its Motion, Drives, and Automation (MDA) pavilions at the show. Those shows tend to have more attendance than the even-numbered years, but attendance was up more than 20% for the 2016 Hannover Messe that included the United States as a Partner Country. "Intelligent intralogistics is the backbone and enabler of Industrie 4.0. It therefore ties in very closely with the Industrial Automation and Digital Factory themes covered by Hannover Messe. And that is why we will be running CeMAT alongside Hannover Messe, starting in 2018," said Dr. Andreas Gruchow as the Deutsche Messe Managing Board member in charge of CeMAT. "This will create a truly unique platform for Industrie 4.0. The synergies are obvious. Staged conveniently at the same time and place, the two shows will cover Industrie 4.0 themes in greater depth and with greater breadth than any other event worldwide." "Intralogistics has a relevance that extends far beyond warehousing and distribution and into manufacturing and assembly," said Christoph Beumer, Chairman of the CeMAT executive committee and managing director of Beumer Group GmbH & Co.

"Intralogistics systems very often control value-added services; they stock and unload assembly lines; and they enable manufacturers to pre-sell products before they even make it off the line and into the warehouse. Intralogistics makes it possible to process short production runs and one-off production jobs cost-effectively and is therefore integral to Industrie 4.0. For these reasons, it makes eminent sense to further expand CeMAT's sharply defined profile and leverage synergies with Hannover Messe."



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me