LED revenue will peak this decade

The 2012 market size is projected to be about $10.9 billion, with $2.9 billion in lighting and $8.0 billion in all other applications.

01/03/2013


IMS Research (acquired by IHS)IMS Research (acquired by IHS Inc.) is forecasting world packaged LED revenue to decline in the second half of the decade according to the latest Packaged LED – World – 2012 Report. With many LED end markets already saturated, the lighting sector is the main driver of growth this decade. The 2012 market size is projected to be about $10.9 billion, with $2.9 billion in lighting and $8.0 billion in all other applications. By 2015 the market is forecast to reach $13.5 billion in 2015, with $5.8 billion in lighting (doubling in three years) and $7.7 billion in other areas (almost unchanged, and actually slightly less).

But there has been a much more important development within the lighting market itself, in that IMS Research expects shipments of LED lamps to remain relatively flat from 2015 onwards. IMS Research Analyst Stewart Shinkwin explained, “This is mainly due to fewer replacements being required each year due to the longer-lifetime of CFL and LED lamps reducing the overall market.” With price erosion set to remain in double digit figures, the LED lighting sector, as component packaged LED revenue, is forecast to contract towards the end of the decade. With no other markets expected to grow significantly, IMS Research expects the total packaged LED market to fall towards the end of the decade (as revenue) once the general lighting market has peaked.

There are, however, a number of factors that could change the outlook, notably if adoption is slower than predicted over the next three or four years. In this alternative scenario, growth would be slower initially but could be maintained for a longer period throughout the decade. Other important issues IMS Research considered in the long-term forecast are how low can the price of an LED really fall, and exactly how much the rate of lumens/watt improvements will slow in the second half of the decade as fundamental limits are reached.

The TV sector is the second largest market for packaged LEDs. This market is forecast to grow slightly from 2012 ($2.0 billion) to 2016 ($2.4 billion), as LED adoption rates increase throughout the time period just enough to overcome price erosion and the reduction of LEDs required for a given area. LCD panel shipments are also forecast to increase slightly, while there is also the trend towards larger screens, one which has been ongoing for a number of years. However the number of LEDs required for a given sized screen has also been decreasing faster than had been previously expected; for example in the first quarter of 2012 the low cost TVs which were introduced used half the number of LEDs for a given area, and although overall LED TV penetration increased as a result, average LEDs per LCD TV actually fell from 175 in the fourth quarter of 2011 to 137 in the first quarter of 2012.  This trend cannot continue at the same rate forever and innovations may cause more LEDs to be used in some cases. However the overall trend is for a slow decline.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me