LED lighting to drive $3 billion power semiconductor market in 2016

A recent report reveals a rapid uptake of LED lighting will result in a potential market of 19 billion power semiconductor units by 2016.

03/15/2012


IMS ResearchThe global market for power semiconductors used in LED lighting is forecast to reach over $3 billion in 2016, according to a new report from IMS Research

IMS Research’s recent report “Opportunities for Power Components in LED Lighting,” revealed that rapid uptake of LED lighting, driven by demand for more efficient lighting and legislation against incandescent lamps, will result in a potential market of 19 billion power semiconductor units by 2016, worth over $3 billion.

The largest opportunity is identified in retrofit LED lamps which are projected to drive more than $2 billion of power semiconductors in 2016. The expanding range of available lamps with varying electronics design, requirements, and specifications are driving opportunities for manufacturers of power semiconductors.

Report co-author and senior market analyst, Ryan Sanderson, commented The complex electronics involved in LED lighting adds a new challenge for traditional manufacturers of lighting solutions. Most designs require knowledge of power electronics, something which many suppliers don’t currently have in-house. The LED lamp market is projected to drive over $1.5 billion of ac-dc and dc-dc controllers and low power MOSFETs (used in solutions which use a controller with an external FET) in 2016. 

The market report also found that LED luminaires present a huge opportunity for power semiconductor manufacturers. One of the largest projected LED lighting markets in 2016 is high power LED luminaires over 60 W, for applications such as street and industrial lighting. Collectively, these applications are forecast to drive a power discrete market of more than $1 billion by 2016, accounted for largely by power MOSFETs and rectifiers sold both directly to LED luminaire and to merchant power supply manufacturers.

Report co-author and market analyst, Jonathon Eykyn, commented “Although some of the largest LED lighting manufacturers have the capability to design and manufacture power circuitry in-house, they still need the knowledge and expertise of the power semiconductor industry and this is something that is unlikely to change.” 

Whilst the report predicts that a large portion of the power supply opportunity in LED lighting (particularly in LED lamps) will be absorbed by these companies becoming increasingly more vertically integrated, it is likely that the power semiconductor opportunity will remain a separate and addressable to all power semiconductor manufacturers.

Eykyn added, “The opportunity is likely to increase further as manufacturers begin to add higher levels of intelligence to their LED lighting products, offering additional functionality to the consumer and increasing energy efficiency.”

Opportunities for Power Components in LED Lighting,” which includes analysis of eight power semiconductor products in 13 LED lighting applications, was compiled following more than 40 hours of interviews with leading suppliers to the industry and is available immediately from IMS Research.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me