Learning labs to showcase technical knowledge

New event features an industry summit to set the course for the domestic manufacturing industry

08/07/2011


Manufacturers from across the country will participate in a series of "Learning Labs" this fall as part of the Interactive Manufacturing Experience (imX). The event features an industry summit to chart a new course for the domestic manufacturing industry. These Learning Labs will showcase industry expertise and foster collaborative learning to propel the U.S. manufacturing industry forward.

Learning Labs will demonstrate technical knowledge from each of the eight imX eXperience partners leading the charge to create this industry-defining event, Sept. 12-14 in Las Vegas.

Presenting Learning Labs at imX will be eXperience partners DMG/Mori Seiki U.S.A., FANUC, Kennametal, MAG IAS LLC, Makino, Methods Machine Tools, Okuma America and Sandvik Coromant.

Important manufacturing industry trends and topics addressed in the imX Learning Labs will include:

  • cost minimization,
  • cryogenic super cooling technology applications in the automotive and aerospace sectors,
  • fully integrated automation solutions,
  • green manufacturing techniques,
  • information flow and shop floor networking,
  • machine investment planning,
  • the manufacturing ecosystem,
  • material evolution toward exotic alloys,
  • metal cutting,
  • micromachining technologies,
  • new technology in titanium milling,
  • process and production planning,
  • production on demand (LEAN technology "pull systems"),
  • productivity and quality enhancements in mining and construction machinery components,
  • retaining a skilled workforce,
  • robotics,
  • tooling trends and tooling technology.

”The imX Learning Labs will showcase our eXperience partners' manufacturing innovations and allow for the open flow of information, even among competitors, that will be crucial to the future of manufacturing," said Steve Prahalis, experience manager, imX. "Industry response so far has been overwhelmingly positive. To date, more than 1,000 high-level executives from 40 states have applied to take part in imX."

Learning Labs will allow attendees to increase their knowledge of new manufacturing technologies and processes through practical, hands-on demonstrations. From a collaborative standpoint, competing suppliers with similar product lines will be located near each other, so attendees can compare all the options available to meet their needs.

imX is jointly presented by leading industry associations the American Machine Tool Distributors' Association (AMTDA) and the Society of Manufacturing Engineers (SME).

"These Learning Labs are a significant step toward the future of manufacturing, a future that will feature increased collaboration among players large and small." said Mark Tomlinson, SME executive director/CEO.

"Sharing technology, processes and ideas is vital to the sustainability of manufacturing," said Peter Borden, AMTDA president. "imX will be a catalyst in opening the eyes of our nation to the innovation and economic driver that is American manufacturing."

www.imxevent.com

Interactive Manufacturing Experience (imX)



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me