Keep your customer focus

It wasn't too many years ago that the customer was the focus of just about everybody in business. We talked about external and internal customers, customer satisfaction, customer surveys, customer service, etc., etc.


It wasn't too many years ago that the customer was the focus of just about everybody in business. We talked about external and internal customers, customer satisfaction, customer surveys, customer service, etc., etc.

But more recently I've detected a shift away from customer focus to operations focus. By operations focus I mean focusing on just about everything other than customers. It's an attitude that puts the highest priority on internal, rather than external, considerations. It's the mantra that says satisfying my objectives is more important than satisfying your needs.

For example, a couple of months ago, I bought a new camera. It didn't work right with the first roll of film. When I took it back to the store, the clerk said they could give me the address for the manufacturer's service center; it was under warranty. Where's the customer focus in that? I had to explain to the clerk that I expected the store to stand behind the products it sold, and that if they wanted to keep me as a future customer, they had better satisfy my desire to have a working product in exchange for the money I paid them.

Or how about this one? I'd had my plane ticket, assigned seat and all, for about 2 mo. My associate tried to get on the same flight 2 wk in advance and was told the flight was full. The day before the flight, he tried again. There had been cancellations. He got a seat. We show up at the gate together. He walks onto the plane. I have to wait because they're not sure they have a seat for me. This kind of scenario has happened to me several times. I'm sure their procedures make sense to them, but I now avoid that airline like the plague.

When the money keeps rolling in, as it seems to in today's economy, there is little incentive to worry about antagonizing a few customers. But, unless we stay alert, those small attitudinal changes begin to grow and spread like viruses. And before long, the customer is forgotten as we pursue our own agendas. When that happens, we destroy ourselves.

For the plant engineer, everyone in the plant is a customer or potential customer. And customer satisfaction is good for both you and your plant. Don't get caught in the insidious drift away from customer service and satisfaction. Keep your customer focus.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me