JA Solar, Flextronics enjoy booming solar module growth, defying tough market conditions in 2012

JA Solar nearly doubled its PV module production in 2012, with its module production rising to 950 MW in 2012.

05/20/2013


IHS, Inc.China’s JA Solar and Singapore-based Flextronics achieved the fastest growth among the Top 10 producers of photovoltaic (PV) modules in 2012, as the two companies cashed in on the soaring demand for contract manufacturing in the solar value chain.

JA Solar nearly doubled its PV module production in 2012, with its module production rising to 950 MW in 2012, up 96% from 490 MW in 2011, according to the "IHS Solar Integrated PV Market Tracker – Q1 '13" from information and analytics provider IHS. This caused the company’s rank among global PV module producers to rise to No. 6 in 2012, up from 14th place in 2011.

Meanwhile, Flextronics increased its PV module production by more than 60% in 2012 to reach 900 MW, up from 540 MW in 2011. The company rose to seventh place in 2013, up from No. 13 in 2011.

The chart below presents the global ranking of the Top 10 PV solar module makers in 2012 based on production.

Source: IHS, April 2013

"Despite the oversupply and price erosion that plagued the solar business though most of 2012, JA Solar managed to almost double its PV module production as it successfully transformed from the top crystalline cell producer into a leading module producer," said Jessica Jin, analyst for solar at IHS. "The company has now built a strong own module brand and could be well positioned for 2013."

Meanwhile, Flextronics is leveraging the contract manufacturing model that has been so successful in the electronics industry in the PV business.

"Flextronics has been largely known for its electronics and IT manufacturing services," said Jon-Frederick Campos, solar financial analyst at IHS. "Given the global market conditions, Flextronics seems to be transitioning its business model to put more of a focus on renewable energy. With many Chinese solar companies facing a tough struggle against antidumping and antisubsidy duties from the United States and the European Union, Flextronics is filling this void for Chinese PV companies."

The Top 5 module producers of 2012 were Yingli, First Solar, Trina Solar, Suntech, and Canadian Solar, each in 2012 producing between 1.50 and 1.95 GW of modules.

Robust production growth expected in 2013

The year 2012 was a tough period for module producers.

Reacting to the challenging market environment, module suppliers focused on clearing inventories and minimizing losses while also reducing factory utilization significantly. 

Global module production growth decelerated dramatically in 2012, rising to 31.6 GW, up only 8% from 2011, according to IHS Solar. In contrast, the market expanded by 104% in 2010 and 31% in 2011.

IHS predicts that the 2013 growth will be substantially higher. Since module inventories have largely been sold off, the expansion of PV installations will be sufficient to drive a global module production of more than 37 GW this year, amounting to growth of 18%.

The portion of the business associated with OEMs is expected to grow at an above-average rate.

OEM shipments in 2012 expanded by a remarkable 51%, whereas total shipments increased only by 21%. With more and more suppliers seeking high-quality manufacturing partners to reduce cost, IHS projects this trend will intensify.

"By working with an experienced contract-manufacturing partner, companies can cut costs by 10% to 15%," Campos said. "At a time when pricing trends are uncertain, costs have become much more important to a company’s margins. Contract manufacturing can help to optimize the supply chain and solve many of the production problems with which PV suppliers are struggling."



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me