It’s “Take a Congressman to work’ month

Plant Engineering Content Manager and Editor, Bob Vavra, discusses his experience at the 2011 Manufacturing/Automation Summit in Chicago, IL.

04/19/2011


In the two days of insights, information and knowledge gained at the 2011 Manufacturing/Automation Summit in Chicago, two specific nuggets were shared by the speakers.

  1. Congressmen need to be educated on the issues facing manufacturing;
  2. Congressmen like white glazed donuts.

U.S. Rep. Don Manzullo of Illinois’ 16th Congressional District, which includes Rockford and most of northwestern Illinois, kicked off the annual Plant Engineering Product of the Year dinner with an a suggestion that manufacturers throw open their doors to their Congressman to help them get a close-up view of the work being done by their constituents.

Most of it is a sincere attempt to bring a face and a name to the broad, sometimes nebulous concepts of manufacturing, although Manzullo made a point to suggest that meeting 100 or so constituents at one time is time well-spent on a weekday out of Washington.

That doesn’t mean it has to be a grand event. A few donuts (Manzullo said Congressmen preferred the white icing) and some good coffee. Oh, and one other thing: “Don’t have a PowerPoint that exceeds 2½ minutes,” he said. “I hate PowerPoints.”

After the donuts, though, comes an opportunity to understand a manufacturing plant, its workers and its challenges in more than abstract terms. “When I go to visit a facility, it locks in. I can see people at work. I can relate to what’s going on in manufacturing,” Manzullo said. “At that point, you’re establishing a relationship. When an issue comes up, that member of Congress has seen your facility. He’s seen the workers; he knows how hard you work.”

It’s time, as we’ve suggested many times, for manufacturing to climb out of the shadows and generate the light and the heat for the work going on in our plants. Absent a clear, aggressive national manufacturing policy, the hard work for manufacturing will have to be done by the hard workers in manufacturing.

That open door policy ought to apply beyond just elected officials. I was reminded when I attended last month’s ProMat Show in Chicago of one of the best examples of this. I visited the Raymond Corp. plant in Muscatine, IA a couple of years ago. While the press was down there to chronicle the event, this was really a celebration of the plant and its role in the fabric of the Muscatine community.

It was a picnic on the grounds for the employees and for the community. It was a chance to show the town what Raymond did in Muscatine, how it operated. Perhaps it gave some young people a vision that this would be a pretty cool place to work, and it gave other business leaders a better appreciation for the importance of manufacturing in a small community.

I was reminded about this when one of the staff from Muscatine came bounding up while I was visiting the Raymond booth to say hello. I’ve told the story of Raymond’s plant open house before as an example to other manufacturers that it’s OK to be visible in the community, in the schools.

It is that kind of grass-roots campaign – something members of Congress know very well – that often has a great impact on how policy is created at all levels of government. We’ve all seen parent groups form to affect change at their local schools, for individuals who care about a particular social issue to come together to campaign, protest and push for change. Isn’t manufacturing important enough to merit the same level of fervor?

There needs to be a method to all of this, of course. We want Congress and our communities to see our plants because they need to understand that manufacturing is not numbers of a balance sheet. They are jobs and people and economic health.

We need a “Take a Congressman to Work” initiative for manufacturing. They’re busy people, of course, but so are we, and manufacturing needs more attention from Congress. We’re at a critical juncture, and we need all the attention we can get.

One important thing: Don’t forget the donuts. White glazed. Your congressman will thank you, and remember you.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me