ISM Report: Manufacturing’s streak rolls on at a slower pace

Sector still expanding, but rate drops off April’s high point

06/01/2012


Institute of Supply Management logo. Courtesy: ISMManufacturing’s three-year growth streak continued in May, albeit at a slower pace than in April, according to the latest Institute for Supply Management manufacturing report.

The manufacturing sector expanded for the 34th straight month and the nation’s overall economy hit the three-year mark in growth, according to the report, issued by the ISM’s Manufacturing Business Survey Committee.

“The PMI registered 53.5% a modest decrease of 1.3 percentage points from April's reading of 54.8% indicating expansion in the manufacturing sector for the 34th consecutive month,”  said committee chair Bradley J. Holcomb, CPSM, CPSD. “The New Orders Index continued its growth trend for the 37th consecutive month, registering 60.1% in May. This represents an increase of 1.9 percentage points from April and also the highest level recorded by the index since April 2011.” A reading above 50% indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.

“The Prices Index for raw materials fell to 47.5% in May, dropping 13.5 percentage points from April, indicating lower prices for the first time since December 2011,” Holcomb added. “Comments from the panel generally reflect stable-to-strong orders, with sales showing steady improvement over the first five months of 2012.”

Despite a slowing in jobs growth in May, comments from survey participants were generally bullish. “Business has been trending moderately higher since the beginning of the year,” said one chemical products manufacturer. “(We) anticipate 5% to 7% growth for the year.”

“Sales were stronger than expected; customers are waiting until the last minute to place orders,” added a machinery manufacturer.

“We are having the best year in sales volume and profit since mid-2008,” said a fabricated metal products manufacturer.

A PMI in excess of 42.6% over a period of time, generally indicates an expansion of the overall economy. Therefore, the PMI indicates growth for the 36th consecutive month in the overall economy, as well as expansion in the manufacturing sector for the 34th consecutive month. “The past relationship between the PMI and the overall economy indicates that the average PMI for January through May (53.6%) corresponds to a 3.7% increase in real gross domestic product,” said Holcomb. “In addition, if the PMI for May (53.5%) is annualized, it also corresponds to a 3.7% increase in real GDP annually.” 

Last 12 months

Month

 

PMI

 

 

 

Month

 

PMI

 

May 2012

 

53.5

 

 

 

Nov 2011

 

52.2

 

Apr 2012

 

54.8

 

 

 

Oct 2011

 

51.8

 

Mar 2012

 

53.4

 

 

 

Sep 2011

 

52.5

 

Feb 2012

 

52.4

 

 

 

Aug 2011

 

52.5

 

Jan 2012

 

54.1

 

 

 

Jul 2011

 

51.4

 

Dec 2011

 

53.1

 

 

 

Jun 2011

 

55.8

 

Average for 12 months – 53.1
High – 55.8
Low – 51.4

 


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me