ISM Report: Manufacturing slumps for second straight month

ISM index hovers just below 50 as uncertainty slows growth

08/02/2012


Institute of Supply Management logo. Courtesy: ISMEconomic activity in the manufacturing sector contracted in July for the second time since July 2009; however, the overall economy grew for the 38th consecutive month, say the nation's supply executives in the latest Manufacturing ISM Report On Business.

The report was issued Aug. 1 by Bradley J. Holcomb, chair of the Institute for Supply Management Manufacturing Business Survey Committee. The PMI registered 49.8%, an increase of 0.1 percentage point from June's reading of 49.7%, indicating contraction in the manufacturing sector for the second consecutive month, following 34 consecutive months of expansion.

The New Orders Index registered 48%, an increase of 0.2 percentage point from June and indicating contraction in new orders for the second consecutive month, but at a slightly slower rate. Both the Production Index and the Employment Index remained in growth territory, registering 51.3% and 52%, respectively. The Prices Index for raw materials registered 39.5%, an increase of 2.5 percentage points from the June reading of 37%, indicating lower prices on average for the third consecutive month. “A growing number of comments from the panel this month reflect a slowdown in their businesses and general concern over increasing economic uncertainty,” Holcomb said.

Manufacturing contracted in July as the PMI registered 49.8%, an increase of 0.1 percentage point when compared to June's reading of 49.7%. A reading above 50% indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.

A PMI in excess of 42.6%, over a period of time, generally indicates an expansion of the overall economy. Therefore, the July PMI indicates growth for the 38th consecutive month in the overall economy, but indicates contraction in the manufacturing sector for the second time since July 2009, when the PMI registered 49.2%. 

The last 12 months of PMI 

Month

 

PMI

 

 

 

Month

 

PMI

 

Jul 2012

 

49.8

 

 

 

Jan 2012

 

54.1

 

Jun 2012

 

49.7

 

 

 

Dec 2011

 

53.1

 

May 2012

 

53.5

 

 

 

Nov 2011

 

52.2

 

Apr 2012

 

54.8

 

 

 

Oct 2011

 

51.8

 

Mar 2012

 

53.4

 

 

 

Sep 2011

 

52.5

 

Feb 2012

 

52.4

 

 

 

Aug 2011

 

52.5

 

Average for 12 months – 52.5
High – 54.8
Low – 49.7

 


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me