ISM report: Manufacturing growth expands in April

Index reaches highest level since June 2011

05/02/2012


The positive outlook surrounding U.S. manufacturing continued again in April, as the Manufacturing ISM report showed a 1.4 percentage point jump on the survey’s index. That marks 33 consecutive months of growth in manufacturing, and 35 straight months of economic growth.

The monthly report, issued by the Institute for Supply Management’s Manufacturing Business Survey Committee, showed not just growth above the 50% figure the committee uses to gauge growth, but also an increase over the March figures. It’s the first time the index has been above 54% since a 54.1% figure in January, and is now at its highest level since July 2011, when the index registered a 55.8% figure.

“Sixteen of the 18 industries reflected overall growth in April, and the New Orders, Production and Employment Indexes all increased, indicating growth at faster rates than in March,” said committee chairman Bradley J. Holcomb, CPSM, CPSD. “The Prices Index for raw materials remained at 61% in April, the same rate as reported in March. Comments from the panel generally indicate stable to strong demand, with some concerns cited over increasing oil prices and European stability."

Among the comments from committee members:

  • "In general, demand remains strong for products, and we [are experiencing] more supply disruptions now than four to five months ago." (Machinery)
  • "The economy was off to a good start through the first quarter, but the European issues keep coming up as well as the recent disappointing jobs report. It appears that some of the early gains may be temporary." (Fabricated Metal Products)
  • "Warm weather in Midwest appears to have helped soft drink sales." (Food, Beverage & Tobacco Products)
  • "Positive increase in volume of sales and orders, and slight uptick in inventories, indicate the overall outlook remains robust through summer at least." (Miscellaneous Manufacturing)
  • "Sales are slowing." (Computer & Electronic Products)
  • "Business conditions on a national scale have a very positive outlook for the commercial metals we provide. At this point, we have outperformed each quarter's goal and anticipate a strong finish." (Primary Metals)
  • "Strong demand [compared to] previous year." (Plastics & Rubber Products)
  • "Business indicators suggest a stronger stability in overall environment. Production and orders are stable." (Transportation Equipment)
  • "Business conditions continue to improve." (Furniture & Related Products)

 

 

 

 

 

 

 

 

A reading above 50% indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.

The average PMI for January through April (53.7%) corresponds to a 3.8% increase in real gross domestic product,” Holcomb said. “In addition, if the PMI for April (54.8%) is annualized, it corresponds to a 4.1% increase in real GDP annually."

THE LAST 12 MONTHS

Month

 

PMI

 

 

 

Month

 

PMI

 

Apr 2012

 

54.8

 

 

 

Oct 2011

 

51.8

 

Mar 2012

 

53.4

 

 

 

Sep 2011

 

52.5

 

Feb 2012

 

52.4

 

 

 

Aug 2011

 

52.5

 

Jan 2012

 

54.1

 

 

 

Jul 2011

 

51.4

 

Dec 2011

 

53.1

 

 

 

Jun 2011

 

55.8

 

Nov 2011

 

52.2

 

 

 

May 2011

 

54.2

 

Average for 12 months – 53.2
High – 55.8
Low – 51.4

 

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com  



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me