ISM number slip, but growth continues

PMI is down slightly from peak, but stays above 60 for fourth straight month

05/09/2011


Economic activity in the manufacturing sector expanded in April for the 21st consecutive month, and the overall economy grew for the 23rd consecutive month, say the nation's supply executives in the latest Manufacturing ISM Report On Business.

The report was issued today by Norbert J. Ore, chair of the Institute for Supply Management Manufacturing Business Survey Committee. "The recent trend of rapid growth in the manufacturing sector continued in April as the PMI registered above 60% for the fourth consecutive month. The New Orders and Production Indexes continue to drive the PMI, as they have both exceeded 60% for five consecutive months. 

“Manufacturing employment appears to have developed significant momentum, as the Employment Index readings for the first four months of 2011 are the highest readings in the last 38 years. Inventory growth also took place in April after two months of destocking; however, the inventory restocking would appear to be necessitated by the strong performance in new orders. While the manufacturing sector is definitely performing above most expectations so far in 2011, manufacturers are experiencing significant cost pressures from commodities and other inputs."

Of the 18 manufacturing industries, 17 are reporting growth in April, in the following order: Wood Products; Plastics & Rubber Products; Primary Metals; Transportation Equipment; Fabricated Metal Products; Computer & Electronic Products; Apparel, Leather & Allied Products; Machinery; Textile Mills; Paper Products; Electrical Equipment, Appliances & Components; Nonmetallic Mineral Products; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; Chemical Products; Printing & Related Support Activities; and Petroleum & Coal Products. Furniture & Related Products is the only industry reporting contraction in April.

Manufacturing continued its rapid growth in April as the PMI registered 60.4%, a decrease of 0.8 percentage point when compared to March's reading of 61.2%. A reading above 50% indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.

A PMI in excess of 42.5%, over a period of time, generally indicates an expansion of the overall economy. Therefore, the PMI indicates growth for the 23rd consecutive month in the overall economy, as well as expansion in the manufacturing sector for the 21st consecutive month. "The past relationship between the PMI and the overall economy indicates that the average PMI for January through April (61%) corresponds to a 6.5% increase in real gross domestic product,” Ore said. “In addition, if the PMI for April (60.4%) is annualized, it corresponds to a 6.3% increase in real GDP annually."

What respondents are saying:

  • "Rapidly rising raw material costs putting extreme pressure on profits." (Food, Beverage & Tobacco Products)
  • "Plastic resin product prices are climbing so fast that [suppliers] are attempting to increase prices on orders already accepted but not [yet] delivered." (Chemical Products)
  • "Customers are rebuilding safety stock levels of inventory, and also trying to buy ahead of material price increases." (Plastics & Rubber Products)
  • "Market continues to get stronger month over month. Recovery is faster than anticipated." (Transportation Equipment)
  • "Pressure from offshore suppliers continues to mount with exchange rate increases and seasonal demand for capacity." (Miscellaneous Manufacturing)

www.ism.ws

Institute of Supply Management

- Edited by Gust Gianos, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me