ISC West 2011, key themes From the show

At what was a busy show in Las Vegas, there were three key themes that stood out: PSIM Software, HD transmission over coax, no "wow" factor.

04/19/2011


IMS research: excellence in market intelligneceAt what was a busy show in Las Vegas, there were three key themes that stood out:

1. PSIM (Physical Security Information Management) Software

This was undoubtedly the biggest buzz circulating the showfloor.  Announcements included the acquisition of Rontal by Verint, the acquisition of Proximex by Tyco and a new PSIM partnership between Honeywell and Boeing.

In a recent press release, IMS Research forecast that the world market PSIM will be worth $200 million in 2014. Whilst the recent news of acquisition and collaboration will impacted the market structure and raised the profile of PSIM software, IMS Research does not believe that recent events will significantly impact the short to mid-term forecast. PSIM software is generally only deployed on high value, mission critical projects and despite the recent annoucements, they are unlikely to have an immediate impact on the extremely protracted sales cycles for these kinds of projects.

2. HD Transmission over Coax

There were two flavours of HD transmission over coax present at the show: 

1.Uncompressed

2.Compressed

With regards to the uncompressed variety, transmission via the HD-SDI standard (or a variant), increasing numbers of manufacturers (predominately from Asia) were either demoing or announcing products utilising this transport medium.

Regarding the compressed version, Sony and Intersil announced a new category of cameras using the SLOC (Security Link over Coax) transmission solution. This technology enables the transmission of simultaneous analogue and compressed HD video over a single coax cable. 

Irrespective of transmission type, it appears that a growing number of manufacturers are beginning to introduce products that leverage the reuse of the existing analogue infrastructure.

3. No "WOW" factor

For a show set in Las Vegas, there was a distinct lack of "razzmatazz". In previous years, the introduction of network video surveillance products, video analytics and megapixel/HD resolution network cameras have all been show defining themes. And whilst there were several interesting and novel products demoed at the show, it would be difficult to pick out anything that could be considered a radical innovation.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me