ISA100 starts interest group for wireless networks

ISA100, the Wireless Systems for Automation standards committee, recently formed an interest group for wireless networks in factory and discrete automation.

01/31/2008



ISA100 , the Wireless Systems for Automation standards committee, recently formed an interest group for wireless networks in factory and discrete automation. A teleconference was held with participants representing automation equipment vendors and users interested in understanding where wireless networks may be applied in different environments.

During the October ISA100 meeting in Houston, support formed to address the need for standards for wireless networks in environments in addition to the processing environments on which the first ISA100 standard focuses. The new interest group will be oriented toward factory automation, discrete parts manufacturing, high-speed machines and other non-process applications. Jim Reizner of Procter & Gamble and Mark O'Hearne of Millennial Net will lead the group.

The interest group was formed to explore opportunities and requirements that are distinctly different from those currently under consideration in ISA100 working groups. The interest group will survey the market to define a broad scope of interest in the community, identify interested parties, and analyze current contributions from other organizations. The group will then consider if a standards effort led by ISA is warranted, based on use cases and current efforts underway with other organizations. If so, the group will develop the scope, purpose, deliverables, and schedule for a proposed new working group - which will then work to define and develop the standard for ISA and ANSI approval.

In the coming weeks, the group is reaching out to the automation industry to determine the interest level for developing a standard for a wireless factory/discrete automation system to serve hybrid and discrete industries such as consumer goods, electronics, automotive, aerospace and others. In contrast to environments driving the ISA100.11a (release1) and other emerging interest groups, this group will consider assembly, batch, blending, packing, robotics, shop floor data collection and other applications. These are likely to drive different demands for mobility, scalability, point density and lower latency.

During the initial conference call to discuss the interest group, participants from Procter & Gamble, General Motors, and Ford voiced user perspectives about how their environments are different from what is currently covered in ISA100.11a. High-speed production lines involve many types of sensors beyond the process sensors (e.g. pressure, flow and temperature) covered by ISA100.11a. In many plants, it is inconvenient or impractical to run wires for sensor I/O, and eliminating high flexure forces associated with cables is a high priority for many manufacturers. Participants also agreed that their companies want to use wireless to build automated production machines, as well as for assembly lines and material conveyors.

For more information on how to participate in the interest group, contact Charley Robinson at crobinson@isa.org or (919) 990-9213.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me