Is breaching security to save a life a punishable offense?

Al Jones was in charge of Supply Room C. His responsibility was a critical one -- to dispense "controlled and protected" drugs when requisitions were properly authorized. Some drugs were rare and extremely pilferable.


Al Jones was in charge of Supply Room C. His responsibility was a critical one -- to dispense "controlled and protected" drugs when requisitions were properly authorized. Some drugs were rare and extremely pilferable. Several were rated "High Security" because of their narcotic content.

Understandably, a strict company rule required at least one attendant to be in Supply Room C at all times. After working hours the room was double padlocked with an alarm safeguard set.

One day, seated at his post, Jones observed an argument taking place in an aisle several yards from the supply room. Bill Cooney and Frank Houk, an ill tempered employee with a record of violence, were hurling heated words at each other. Suddenly Houk pulled out a knife and appeared on the verge of attacking his terrified adversary.

Cooney's life was clearly in danger, Jones decided. He jumped up and raced to Cooney's aid. He succeeded in pacifying Houk and persuading him to pocket the knife. Breathing his relief, Jones felt proud of himself. He had prevented violence and very possibly had save a man's life.

Maintenance Foreman Glen Carter, however, viewed Al Jones as more a violator of an inviolable company rule than a hero. "That was a gutsy thing you did," he conceded. "But I have no choice but to give you a month's suspension for leaving that supply room unattended."

"No way!" Jones protested. "I'm not sitting still for this."

Question: Considering the critical nature of Supply Room C security, do you think Jones' breach is a punishable offense?

Jaffe's decision: "Cancel the discipline," Plant Engineer Albert Jaffe instructed when Carter put through the suspension notice. "Protection of human life is a public policy priority that rates higher than anything else. In fact in some court cases even fundamental constitutional rights were held secondary to this priority. Security rules are important, but they hold second place to Jones' life saving action. He deserves a commendation for that."

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me