Is a wave of price cuts coming?

Producers of factory equipment and tools are doing a mixed job of navigating troubled economic waters. Three industries (lift trucks, transformers, and motors) received a failing F margin grade in March 2003. Seven industries earned troubling D grades. Increasing costs as prices stall have been the cause of these margin troubles.


Producers of factory equipment and tools are doing a mixed job of navigating troubled economic waters. Three industries (lift trucks, transformers, and motors) received a failing F margin grade in March 2003. Seven industries earned troubling D grades. Increasing costs as prices stall have been the cause of these margin troubles.

The only way out for many suppliers will be to hike prices. The fact that end markets are starting to show some pep may make higher tags easier to enforce in the latter half of 2003.

For plant engineers hoping to avoid wholesale price increases, we have some suggestions. Eight of 19 industries in PLANT ENGINEERING magazine's marketbasket of factory equipment industries seem to enjoy margin positions that would encourage future price cuts. Most of the industries in this position are essentially living off margin surpluses created prior to March 2002. For buyers, that means constructing a cost-based argument for lower prices may be more challenging.

The best negotiation opportunities lie in the instruments market (SIC 38). Here, 11 of 17 industries can afford to lower prices by amounts ranging between 0.8% and 5.6%. For example, makers of process control instruments (SIC 3823) have kept price increases in line with cost changes. Pre-2002 inflation victories, however, mean margins remain above normal. As a result, SIC 3823 can safely cut average prices by 1.65%.

Looking at other sectors, we see that the first quarter was very good to makers of speed changers, drives, and gears (SIC 3566). Here, industry prices advanced 1.8% while costs rose at about half that pace. These expanded margins have created a discounting ability of 1.6%.

Price/cost/demand roundup

Average Product Prices Average Product Prices Direct Mfg. Costs Direct Mfg. Costs Growth in U.S. End Markets Growth in U.S. End Markets
Industry SIC Dec 02 Mar 03 Costs are... Grade Dec 02 Mar 03

the average producer in an industry. Grades of A to A+ mean plant engineers may be able to strike a better bargain with suppliers and better control plant costs.

Other Hand and Edge Tools34230.96-0.06stableD0.300.66
Hand Saws and Saw Blades34251.031.70risingD-0.45-0.12
Other Hardware34290.860.48stableD-0.420.16
Other Power Transmission Equipment35681.791.43stableD-2.84-0.23
Conveyors and Conveying Equipment35350.350.07stableB-3.56-2.26
Hoists, Cranes and Monorails35360.590.79stableA-4.89-4.97
Industrial Trucks and Tractors3537-0.060.01stableF-0.68-0.30
Metal-Cutting Machine Tools3541-4.29-3.37stableD-4.51-1.67
Machine Tool Accessories35450.410.19stableC0.613.39
Power Driven Hand Tools35460.24-0.21stableD-0.82-0.63
Welding Apparatus35481.170.79stableD-2.54-1.92
Pumps and Pumping Equipment35612.131.55stableA-2.41-1.68
Air and Gas Compressors35631.891.50stableB-2.41-1.68
Speed Changers, Drives and Gears35661.081.27stableB-2.84-0.23
Motors and Generators36210.050.28stableF-2.61-0.21
Process Control Instruments38231.231.39stableA-1.050.10
Fluid Meters and Counting Devices38240.831.49stableA-1.050.10
Instruments to Measure Electricity38250.860.46stableB3.536.78

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me