IQS quality solution remakes automotive supply chain in U.S., then China

Bloomfield Hills, Mich.-based Cequent Group, which makes automotive towing systems, trailer parts, and associated brake and electrical components, recently rolled out an enterprise quality management system from IQS to its Chinese supplier base. Embedded in Cequent's U.S. manufacturing operations since 2002, the intention was to duplicate the system's success in establishing both a formal quali...

03/01/2008


Bloomfield Hills, Mich.-based Cequent Group , which makes automotive towing systems, trailer parts, and associated brake and electrical components, recently rolled out an enterprise quality management system from IQS to its Chinese supplier base. Embedded in Cequent's U.S. manufacturing operations since 2002, the intention was to duplicate the system's success in establishing both a formal quality management system as well as a significant reduction in defects.

Back in 2002, Cequent's manufacturing operation in Tekonsha, Mich., had been given a matter of months to



"Chinese suppliers tend to respond to the quality problems by throwing inspection labor and rework at them, rather than relying on quality management and quality processes."

—Kreg Kukor, director of global quality systems, Cequent

install a quality system that was compliant with the Ford Q1:2002 standard, recalls Kreg Kukor, Cequent's director of global quality systems. With the Tekonsha business then up for sale by its previous owners, funding was tight, and IQS' ASP-based business model was attractive, he explains.

So too was the associated speed of implementation. “We had the data loaded in two weeks, and five days later we were operational.”

Parts-per-million defect levels, then running at 4,200 per month, fell to 369 per month after just nine months, and now average 50 per month. Those same benefits were attractive in terms of Cequent's Chinese suppliers, explains Kukor.

“Not only were quality defects from our Chinese suppliers running at a thousand times our U.S. rate, but Chinese suppliers tend to respond to the quality problems by throwing inspection labor and rework at them, rather than relying on quality management and quality processes,” he says.

The U.S. deployment was rapid, with Cequent's first Chinese supplier going live on a transaction-entering basis within 24 hours. The parts-per-million monthly defect levels have fallen from 33,555 to below 300, says Kukor, and 97.5 percent of product destined for Cequent now moves through the Chinese plants without incurring rework.

“IQS made it possible for us to develop a robust quality management process for suppliers that we can quickly replicate across our entire global supply chain,” concludes Kukor. “Our suppliers appreciate the effort we put into our supplier quality management program. It improved their own performance, and secured long-term business relationships with us.”





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me