Intelligent rack PDUs driving total global rack PDU revenue growth of 6% in 2013

Global rack power distribution unit 2013 shipments are projected to grow 3%, while 2013 global revenue is projected to grow over twice as fast, at a rate of 6.3%, according to a recent IHS Inc. report.

01/06/2014


Global rack power distribution unit (PDU) 2013 shipments are projected to grow 3%, while 2013 global revenue is projected to grow over twice as fast, at a rate of 6.3%, according to a recent IHS Inc. report: The World Market for Rack Power Distribution Units. Forecasts for higher revenue growth are based on the assumption that intelligent units will continue to gain product share, therefore driving up average unit prices. Intelligent units, which have the ability to connect to a network, can meter electricity consumption, switch outlets on and off, and even accommodate environmental sensors.

Though their effect on revenue growth is significant, IHS predicts that by the end of 2013, intelligent PDUs will still only account for 20% of unit shipments globally. IHS Analyst Sarah McElroy points out, "The market for intelligent rack PDUs is nowhere near saturated yet. The biggest opportunities still lie in Asia." IHS estimates that less than 10% of rack PDU shipments in Asia are intelligent units.

Within Asia, adoption of intelligent rack PDUs is occurring at different speeds. For example, while the Chinese market remains predominantly non-intelligent, Hong Kong, as a more mature market, has a higher penetration of intelligence. Other mature markets like Oceania and Japan have a higher penetration of intelligent units than the rest of Asia as well.

"The multinational suppliers have been active in the intelligent space for some time, but now we are starting to see some of the local Asian suppliers introduce rack PDUs with intelligent features," McElroy adds. In Asia, relatively small local suppliers make up a large share of the rack PDU market. Traditionally, they have been known to be agile competitors, manufacturing low-end basic products and competing on price. Their gradual entrance into the intelligence space foretells further growth in these product categories in Asia and also increased competition for international suppliers.

IHS regularly analyzes all aspects of the data center infrastructure market. The World Market for Rack Power Distribution Units - 2013 Edition provides in-depth analysis across three world regions: the Americas, EMEA, and Asia. Unit shipments, average unit prices and revenues are estimated for 2012 and forecast through 2017. The market is segmented by sub-region, product type, power rating, input phase, form factor, vertical market, and sales channel. Supplier market share estimates for 2012, and an analysis of the competitive environment, are also provided. Additionally, IHS analyzes the market for rack power distribution units quarterly in the company’s free-to-participants"“Rack PDU Tracker," which complements the annual report.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me