Instant snapshot: Inventory “rightsizing” program softens impact of the credit crunch

10/22/2008


Inventory management specialist ToolsGroup says it has an innovative new program to help companies quickly “rightsize” their inventories, free up millions of dollars of cash, and improve free cash flow—or FCF. The new program, called Rapid Inventory Rightsizing (RIR), seeks to reduce a company’s working capital needs.
In this era of tight credit and higher cost of capital, cash is king. According to the U.S. Federal Reserve’s most recent quarterly survey of senior bank loan officers, 58 percent have tightened lending standards to large and midsize businesses, and more than 80 percent surveyed say their customers are paying more for loans.
Rightsizing inventory presents a good source of short-term working capital and improved FCF. When the composition of inventory deteriorates over time, a large financial asset is not being used efficiently. Managers find that they have too many of the items they don’t need and not enough of the items most in demand.
RIR is suited for companies with large inventories not being put to optimal use. By improving inventory targets, companies reduce global inventory levels while still maintaining excellent customer-service levels—i.e., fill rates. The program is targeted at CEOs and CFOs looking for increased liquidity or free cash flow, and supply chain executives addressing corporate mandates to reduce inventory cost while maintaining customer service metrics.
For example, a supply chain director with a Fortune 1000 consumer packaged goods company recently commented, “We achieved a 25-percent reduction in inventory and 99-percent service levels. ToolsGroup let us re-mix the stock in two months. Needless to say, our finance people were ecstatic.”
Companies typically expect to generate cash of between 10 percent and 30 percent of their inventory value, while maintaining the same or improving customer service. The program costs a small fraction of the inventory saved and cash generated. According to ToolsGroup, the program also is easy to implement because it requires no changes to the company’s distribution/supply network or technology infrastructure.
Implementation involves three steps:
1. An immediate rightsizing of the inventory to eliminate the least effective inventory and insure profit-generating and strategic products are properly served. Capital is rapidly reallocated to the most financially productive areas. Inventories that are not aligned with profits and customer service are drawn down. Because this first step can be implemented in a few weeks, it can rapidly begin generating free cash flow, often within the same quarter.
2. All inventories are adjusted to avoid excess inventory experienced in a slow down, while maintaining customer service levels. As revenues slow in certain product streams, most companies neglect to adjust their inventory targets to changing circumstances. While individual items will vary, overall inventory requirements are reduced, freeing up additional cash flow.
3. An ongoing review process, managed either inside or outside the company, to keep inventory targets aligned with changing conditions and insure a sustainable results over time.
“Using the experience we’ve gained at more than 150 corporate clients in a variety of industries, we can run an instant snapshot of a company’s inventory and immediately identify the potential savings and time-to-benefit,” says Joseph Shamir, CEO, ToolsGroup. "In today’s tightening credit environment, this ability to move quickly is critically important to our clients."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me