Industry Voices: William Gaskin

Bill Gaskin is president of the 900-member Precision Metalforming Association (PMA), the full-service trade association representing the $113-billion metalforming industry of North America.

02/18/2013


With some of the federal issues resolved for the moment, how would you evaluate the growth potential for the manufacturing sector?

There is great potential for growth in the manufacturing sector. PMA conducts a monthly Business Conditions Report where we survey member companies. The latest Report, released this month, showed that metalforming manufacturers expect a spike in incoming orders and an improvement in business conditions over the next three months. Still, our members continue to worry about the significant uncertainty in the manufacturing sector caused by ongoing debates in the federal government about fiscal issues. To be successful manufacturers need stability and certainty in order to grow and prosper.

Another issue that is concerning for manufacturers in the coming years is the new healthcare law. In fact, in a recent survey, Precision Metalforming Association and National Tooling and Machining Association members ranked healthcare as the highest priority public policy issue. Many of our members are small- and medium-sized businesses who are eager to expand as the economy recovers. But they are held back by worries about the impact the Affordable Care Act will have on their businesses. Many have already seen their health care premiums go up in the past year—some by as much as 20%.

How much of that growth is determined in the U.S., and how much is a matter of global issues?

The interconnectedness of the manufacturing sector across the world means that our members are impacted by fluctuations in the U.S. economy as well as in the economies of other countries. This creates challenges but also incredible opportunities to sell products to new markets.

Europe continues to suffer from an ongoing fiscal crisis. Complications in this region negatively affect our members who export to Europe.

Another problem stems from foreign governments engaging in unfair practices. When this happens, it hurts the ability of our members to compete in the global market. Nearly 60% of our member companies report that their companies have lost work in the past 24 months because of unfairly low priced foreign competition.

What factors outside of government will continue to affect manufacturing in 2013?

The manufacturing sector continues to lead our country out of the recession today, but that growth is threatened by a severe skilled worker shortage. Studies show that tens of thousands of manufacturing jobs remain open in this country because employers cannot find qualified applicants. Nearly three-quarters of our member companies have job openings, and they indicate that the problem will get worse as the majority of their skilled workforce heads toward retirement and younger workers are not prepared to replace them.

One way that the Precision Metalforming Association is working to combat this worker shortage is by supporting the Center for America’s American Jobs for America’s Heroes campaign. This campaign helps military veterans and members of the National Guard find work in American manufacturing jobs.

Finally, industries of all kinds are impacted by a wide array of technological developments, and manufacturing is no exception. These new technologies were the focus of the recent FABTECH exhibition, North America’s largest metal forming, fabricating, welding, and finishing trade show. PMA is a sponsor of the show, which took place in Las Vegas in November 2012. More than 1,250 exhibitors displayed incredible new technologies which continue to revolutionize our industry.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me