Industry leaders urge technology push to boost manufacturing

Innovation, sustainable energy the key, Rockwell CEO tells National Press Club meeting

09/09/2009


A federal strategy and support is critical if American manufacturers are to thrive in the post-recession global economy, leading U.S. manufacturing experts said Wednesday.
"U.S. manufacturers absolutely must have innovative energy-efficient and productivity-enhancing technology to be competitive," Keith Nosbusch, Rockwell Automation, Inc. chairman and CEO, told a press briefing at the National Press Club.
This transformation to smarter, safer and more sustainable manufacturing provides an opportunity for the federal government to help develop and make innovations in American plants to keep them competitive and to promote a sustainable U.S. manufacturing employment base, the speakers said.
"We all are pleased that President Obama has named a manufacturing czar to coordinate federal policy and programs to help U.S. manufacturers," Nosbusch said. "Up until 1990, federal support for applied research - which is most critical for manufacturing - was equal to federal funding for basic science. But today it is about 30% lower with nearly a $10 billion gap that needs to be remedied."
"Congress also needs to expand federal tax credits to apply to investments in smart, safe and more sustainable manufacturing technologies."
U.S. industry is in a battle not just with countries with lower costs, but also with developed countries that are investing in new technology, said Emily DeRocco, president of the Manufacturing Institute and vice president of the National Association of Manufacturers.
"With high quality, inexpensive products flooding the market from every corner of the globe, competing on cost alone is a losing battle for most U.S.-based manufacturers," DeRocco said.
The cost of manufacturing in the United States is nearly 18% higher than in America's nine largest trading partners, she said. That puts the 13.8 million manufacturing jobs in the United States at risk.
The European Union already has allocated about $2 billion to encourage its manufacturers to invest in the next generation of technology for energy efficiency and productivity.
"To stay in the game, American companies must differentiate themselves through innovation," DeRocco said. "Only those countries that invest in innovation and a highly skilled workforce will stay competitive."
Most energy efficiency has come from implementation of new technology, said R. Neal Elliott, associate director of Research at the American Council for an Energy-Efficient Economy.
"We estimate that two-thirds of energy efficiency gained in the past 20 years has come from the application sensors and controls," Elliott said. "We can reduce manufacturing energy intensity by more than half in the next 20 years as we begin to integrate smart technology not just into equipment, but into entire manufacturing systems, plants and ultimately into the entire supply chains."
These innovations have a number of advantages, said Evan R. Gaddis, president and CEO of the National Electrical Manufacturers Association.
"Not only do these technologies provide great efficiency gains, but they also reduce carbon emissions, move our country one step closer to energy independence, and also make other sectors using these energy-efficient technologies more productive," Gaddis said.
Federal policy needs to support three things: research, a level playing field for trade, and a tax and regulatory environment that spurs innovation, said Thomas J. Duesterberg, president and CEO of the Manufacturers Alliance/MAPI.
"It is high time for Washington to recognize that the policy environment matters to the ability of manufacturers to compete successfully in our globalized economy," Duesterberg said. "‘Smart, Safe and Sustainable Manufacturing' is not a slogan. It's a blueprint for success in the world economy and improving our standards of living."
While billions of federal dollars are going toward retooling the auto industry, little has been earmarked to provide a "greenprint" to stimulate the same kind of transformation toward smart, safe and sustainable manufacturing, speakers said.
They recommended these federal actions:
• Ensure legislative priorities are in line with those of manufacturers and the general public.
• Double federal funding for manufacturing innovation.
• Establish a $2 billion public-private partnership program to research and develop a manufacturing "greenprint" for smart, safe and sustainable manufacturing.
• Provide federal assistance for public-private partnerships to create demonstration projects that foster manufacturing innovation.
• Expand federal tax credits to apply to investments in advanced technologies that automate and modernize factories.

 





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me