Industrial robotic safety risk assessment tips

Assessing safety risks from industrial robots is important, but knowing where to start can be difficult, but the long-term benefits make it worthwhile.

06/26/2018


Courtesy: Bob Vavra, CFE MediaIndustrial robots provide many bottom-line benefits for manufacturers, but they are also inherently dangerous and it's the responsibility of manufacturers to ensure a safe production environment for workers.

Many view safety as a chore, but industrial robotic safety can actually have many benefits, including the assurance of regulatory compliance and increased productivity on the factory floor. Assessing safety risks from industrial robots is important, but knowing where to start can be difficult.

Assessing the risks of industrial robotic technology is the first step in achieving robotic safety in a factory setting. A proper risk assessment for industrial robotics typically includes two steps: a risk analysis and a risk evaluation.

A risk analysis may be the more involved process of the two and often requires three different steps: determining the limits of the robotic machinery, identifying the potential hazards involved in production, and estimating the risk of identified hazards. While not every manufacturer will be able to follow these exact steps, they are a good guideline for a proper industrial robotic risk assessment.

Identifying hazard sources in industrial robotics

Hazard identification in industrial robotic processes may be one of the most important steps in a safety risk assessment. Hazards can come in mechanical, electrical, thermal, noise, vibration, radiation, material or ergonomic form.

The type of hazard presented depends on your application, and is just as dependent on when industrial robots are interacted with, such as during integration, training, maintenance or routine production. The instances of interaction, along with the types of hazards, need to be assessed in relation to the types of safety protocols put in place to prevent injury or harm to workers.

Identifying sources of hazard in industrial robotics is a key step and not always a straightforward consideration. Once the hazards are identified, and the instances of robotic interaction are established, assessing safety risks becomes more simplified. Safety in industrial robotics is paramount. Manufacturers have a responsibility to protect workers from injury or harm, and can even achieve regulatory compliance and increased productivity in the process of improving safety.

This article originally appeared on the Robotics Online Blog. Robotic Industries Association (RIA) is a part of the Association for Advancing Automation (A3), a CFE Media content partner. Edited by Maura Walsh, content specialist, CFE Media.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me