Industrial Efficiency - Debunking the Myths: Putting time, money into pumps will pay off

In this third installment of this series, Jack Creamer addresses three common myths regarding the impact of pumps in a facility, energy efficiency, and ROI.

10/04/2012


Myth: In a large industrial facility, how much impact does pumping really make on my energy use? It’s not worth the investment.

Pumps are a primary application in all aspects of the industrial world—from supporting liquids management for various industrial processes to comprising integral elements of HVAC or plumbing systems. As such, they are a tremendous consumer of energy for an industrial facility, and represent tremendous energy savings potential—up to 60% in many cases.

Pumping and pumping systems account for nearly 25% of all industrial motor energy usage. The common practice of oversizing pumps to allow for anticipated load demand or other safety reasons provides a key opportunitiy for “right-sizing” the motor to decrease energy waste. General wear over time, leads to degradation that greatly reduces the operating efficiency of the system. Additionally, relatively minor changes in speed can produce significant energy savings. VFDs, especially centrifugal pumps, allow you to both optimize pump operation and match varying loads—a huge energy saver.

Beyond right-sizing, there are a number of strategies to undertake which increase efficiency and in turn create substantial energy savings. Process energy optimization (PEO), an active energy management solution, provides for system profiling at optimum operating points.

Making investments in energy management at the pumping level gives more than just reduced consumption and smaller energy bills. Becoming energy efficient, or generating energy by saving it, opens up new doors for buildings to actually produce revenue by participating in utility demand response programs—making the ROI even greater.

Myth: The road to an energy efficient building is through lighting and HVAC.

Energy management in the pump realm is of growing interest, supported by key industry initiatives, economic incentives and demonstrated financial benefits to industry and building owners alike. Because pumps play a major role in all HVAC systems, and due to the nature of their application, design, and operation, they represent an excellent opportunity to reduce costs and increase reliability in all commercial building systems.

Enhanced controls are at the center of such solutions. Variable frequency drives, enhanced by intelligent controls, will pave the way for system optimization in the future, enabling efficiency improvements in application areas such as commercial buildings. Smart Motor Management systems can play a role equally as important as lighting and other initiatives, ensuring system performance and providing system monitoring and feedback to reduce the likelihood of failure.

Of course lighting and HVAC cannot be ignored—but pumps should be an area for consideration In fact, a little known piece of information about the HVAC systems is that two of its primary applications are pumps and fans. Pumping is responsible for up to 15% of a building’s peak energy use and in the typical life cycle of a pump, energy costs account for almost 40% of the total costs.

Myth: Intelligent pumping makes sense as a strategy for new construction, but the ROI of an update or retrofit just isn’t there.

Intelligent pumping can simply be defined as the combination of a pump and a VFD with digital control capability. As this trend continues to emerge, we see new implications or possibilities for:

  • Energy management
  • Remote condition monitoring
  • Remote systems control.

Intelligent pumping systems are expanding to include wireless monitoring and control capabilities which provide users with the ability to access real-time operating data on their pumping equipment, offsetting the higher initial costs through reduced unplanned downtime and improved predictive maintenance plans. The added benefits of wireless systems are apparent when reviewing the current challenges faced by pump system end users.

Historically, pumping system automation has often been addressed as a one-off engineered solution based on customer needs and architectural/consulting engineering specifications. However, as the technology evolved, and more importantly, became increasingly user friendly, facility operations personnel and management have demonstrated the desire to leverage the latest technology available—such as Internet communication for monitoring and control, WIFI communications, smart phone interface to their pump controller, for alarms and remote control and configuration.

According to the U.S. Environmental Protection Agency, more than 50% of the transient water systems in the U.S. do not have remote monitoring and control of their pumping assets—intelligent pumping systems help with this.

In fact, Frost and Sullivan anticipates that the market for real-time mobile asset tracking and preventative maintenance monitoring to increase five-fold by 2020.

Jack Creamer is a market segment manager focused on the OEM pumping equipment sector for Schneider Electric North America. He earned a bachelor’s degree in Industrial Engineering from Syracuse University and an MBA from Rensselaer Polytechnic Institute. He can be reached at jack.creamer@schneider-electric.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me