Indoor positioning: Crowd-sourcing and the ‘Second wave’

Companies are crowd-sourcing their RF databases to aid GPS and improve indoor location accuracy as well as create a stronger alignment with satellites.

05/09/2012


As we all know, GPS is perfectly fine when locating a device outdoors, but falls short when attempting to do the same indoors or in built-up urban areas, so-called urban canyons. This has meant that other technologies have also been required for locating devices indoors with Wi-Fi the most commonly utilized technology to-date – through techniques such as pattern matching (fingerprinting) or trilateration using signal strengths.

The issue with fingerprinting, with any wireless technology, is scalability. Time consuming manual surveys are required of venues; this is before considering the changeable indoor environment may need repeated re-surveying to maintain its positioning accuracy. Using signal strengths for trilateration encounters difficulties with accuracy itself, where it is just not precise enough, typically around 30 meters, to create a compelling use-case. So what’s the solution?

It’s been well publicized that Apple and Google have been ‘crowd-sourcing’ their RF databases, to aid GPS and reduce time-to-first-fix for some time. However, Google recently announced that venue owners can manually survey their venues to help provide better indoor location to Google Maps users, something that Qubulus also offers. This removes the time-consuming ‘manual’ element, improving the scalability of the solutions offered.

IC manufacturers are also getting in on the act. With CSR announcing its SiRFusion platform in November 2011, which not only cleverly amalgamates data from a number of different wireless technologies and MEMS sensors, but also crowd-sources location data which is pulled from a cloud-based system to help improve positional accuracy. Broadcom and TI have also announced indoor positioning products recently, making use of a range of wireless technologies and MEMS sensors. The increased focus on services to complement the hardware, akin in some ways to the provision of satellite location (ephemeris) data for use with GPS, is vital to improving the scalability of indoor positioning solutions, as is Google’s announcement that it would be crowd sourcing the RF environment in venues through its ‘Floor Plan Marker’ application.

This first wave of solutions utilizing multiple wireless technologies and MEMS sensors with crowd-sourced location data will provide increased indoor location accuracy and scalability, enabling compelling use-cases. As this market becomes established, and as even higher accuracy technologies become commercially available, it is expected that there will be demand for a ‘second wave’ of improved solutions; these services to improve the scalability and accuracy of current solutions are therefore vital in order to achieve this. Second wave technologies such as Nokia’s Bluetooth HAIP, and continuing enhancements to existing solutions, offer improved accuracies to enable increasingly interesting use-cases – such as product-level search and navigation, high precision proximity-based marketing, or augmented reality – for venue owners, marketers, and consumers.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me