Increasing use of smart pumps to help drive down “Never Events”

Increased focus on providing optimum patient care in the most cost efficient way is fuelling demand for intelligent infusion devices termed “Smart Pumps.”

05/15/2012


Increased focus on providing optimum patient care in the most cost efficient way is fuelling demand for intelligent infusion devices termed “Smart Pumps.” A report from InMedica, a division of IMS Research, recently acquired by IHS Inc., on the global market for infusion pumps found that, despite market saturation in the developed countries, demand for advanced technology is being maintained; infusion pump suppliers must offer technically advanced products at competitive prices to maintain market share.  Smart pumps with software to reduce the risk of dose error in IV therapy, to provide safer patient care, is becoming increasingly important, in the light of reimbursement restrictions for “never events” in U.S. hospitals. InMedica predicts the U.S. market for large-volume infusion pumps will increase to $500 million by 2015.

“Medication errors, during prescription, preparation or administration of medication, can lead to adverse drug events (ADEs). According to the National Health Service (NHS) in the U.K., intravenous (IV) pumps can account for up to 35 percent of medication errors,” comments Kelly Barritt of InMedica.

“It is becoming more apparent that systems need to be implemented to prevent such errors from occurring. Dose error reduction software is designed to check the information a physician programmes into a pump against the limits set by the drug library; the care-giver is then alerted of an error before infusion starts,” continues Kelly Barritt, Senior Market Analyst. As provision of care becomes increasingly pressured, with nurses and physicians often working long hours to meet patient demand, smart pumps will help to reduce errors.  Customers will favour products with higher levels of harm-reduction software to eliminate ADEs; use of the next generation of ‘Smart’ pumps will grow quickly. In addition, the number of devices for home use incorporating safety features is also increasing, further driving growth in this market.

Furthermore, in an attempt to drive down the cost of treatment, patient care is being transferred to lower-acuity departments and in some instances to the home; technology is developing as a result.  Radiofrequency identification (RFID) chips have been installed by some manufacturers in infusion pumps, to allow healthcare institutions to track their location. The RFID chips enable pumps to be quickly accessed, reducing the search times in large hospitals. Device tracking may also be successful in home-care environments, enabling the home-care agencies to monitor the locations of the pumps on loan.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me