In international shipping, detail is important, assistance is available

Shipping products overseas can be hazardous, but there are steps you can take and assistance is available from the government to minimize any potential problems.

03/02/2012


It is important to be concerned when shipping products abroad. In fact, anything can occur when the product is in transit. Two steps are crucial in this process:

  1. Defining the appropriate distribution channels.
  2. Issues relates to packing, labeling, documenting and insuring the cargo.

To begin, the U.S. government offers assistance and advice through different agencies to exporters in order to define convenient distribution channels, to meet with overseas buyers and to get export incentives. Following are the names of these agencies:

  • The US and Foreign Commercial Service (US+FCS) offers export promotion programs
  • The US Export Assistance Centers provides export marketing and trade finance counseling service
  • The National Trade Data Bank (NTDB) compiles export promotion and trade data
  • The Gold Key Service of the commercial section of the US Embassy, in most countries around the world, arranges appointments with agents and distributors overseas
  • The International Buyer Program gives exporters the opportunity to meet qualified foreign buyers of their products at trade shows in the US
  • Commercial News USA offers exporters the opportunity to advertise in a consolidated catalog of US products and services distributed in 155 countries

Step two involves several actions, the first being the correct packing of the cargo. Well designed crates help to prevent products from being shattered, damaged by dampness or stolen. The following are important points to take into consideration when packing:

  • Crates should be sealed to prevent humidity due to condensation or exposure to the elements
  • Crates must be sturdy to stand accidents during delivery
  • When in boxes, goods should be palletized and placed in containers
  • Wood pallets must comply with ISPM 15 (phytosanitary compliance) as per the International Plant Protection Convention
  • Bracing ensures an even allocation of volumes in the container
  • All packages and fillers have to be made of moisture resistant materials
  • Observe any product specific hazardous packing requirements

Labeling is another important action in the exporting process. All volumes have to be labeled correctly to ensure appropriate handling and on-time delivery to the right place. Avoid writing contents and brand names in the volumes. The overseas buyer must inform which export marks should appear on the cargo for easy identification. Also, the following export marks must be added on the domestic bill of lading:

  • The name of the exporting carrier
  • The latest allowed arrival date at the port of export
  • Instruction for the inland carrier to notify the international freight forwarder by telephone upon arrival

It is prudent that the exporter always uses the services of a freight forwarder. They are aware of overseas import and domestic export regulations as well as the documents related to foreign trade. Freight forwarders can help in the following manner:

  1. Reviewing all shipping documents to ensure its accuracy like letter of credit or bank draft 
  2. Preparing the bill of lading and any special required documentation
  3. Routing the documents to the seller, the buyer, or to a paying bank
  4. Coordinating with customs brokers overseas to ensure that the goods comply with customs regulations 

Finally, exporters are advised to consult with international insurance carriers or freight forwarders for appropriate insurance. Insurance provides protection to cargo against unsafe weather conditions, delay and rough handling by carriers. Coverage is usually placed at 110% of the CIF (cost, insurance, freight) or CIP (carriage and insurance paid to) value. The exporter or the foreign buyer should either obtain its own policy or insure the cargo under a freight forwarders policy based on the incoterm.

Ron Carvajal works in International Accounts for Yaskawa America, Inc.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me