In Depth: Machinery production growth rebounding, but challenges are ahead

The machinery market is poised to grow more than 10% in 2011, according to a new report from IMS Research, and they expect that trend to continue through 2014.

10/07/2011


IMS Research LogoThe machine sector was among the hardest hit by the economic downturn, and given the long-lead nature of the business – it was also one of the last to suffer. However, according to the latest report from IMS Research, worldwide production of machinery is set to eclipse its previous record, set back in 2008. IMS Research market analyst Andrew Robertson talked with CFE about how the export business has fueled some of the return to form for the sector, and what lies ahead for the U.S.

CFE Media: The rebound for machinery production from the 2009 recession has been pronounced. What’s driving that kind of growth at a time when the rest of the recovery seems to be slowing?

Robertson: Machinery production historically tends to be an industry that fluctuates greatly with troughs and peaks tending to be particularly severe.

When the downturn came, investment was put on hold and inventory allowed to run down. This meant that when recovery emerged where was a big bounce back from replacing inventory and catching up with projects that had been put on hold. The sector also benefitted from stimulus packages which were seen from governments around the world.

Although demand from Europe and America may not be spectacular, machine builders in these countries still benefitted from strong demand from Asia Pacific.

CFE: It’s no surprise to see machinery production growth in Asia, but perhaps a bit of a surprise to see Japan leading that recovery. Talk a bit about the strength of the Japanese machinery market compared to North America and Europe.

Robertson: I would be careful in talking about the strength of the Japanese recovery. It is important to remember where from where this recovery is starting. Although there was a big percentage increase in 2010, the magnitude of the decline in 2009 was such that output is still way behind where it was in 2008. It’s worth considering that in 2009 Japan’s GDP declined by 6.3% (more than Canada, US, UK, Germany, France, Italy, Greece, Portugal and Spain) before growing 4.0% in 2010 (Japan’s biggest increase since 1990).

Japan is particularly reliant on exports, and so suffered badly from the decline in trade that was seen in 2009. When the upturn came, though, Japan was benefitted strongly from exports to other Asian countries, in particular China.

Past, current and projected machinery production by country from 2007-2014. Courtesy: IMS Research

CFE: There seems to be a correlation between those European countries with struggling economies and their machinery production growth. Does that look likely to continue, or can machinery production actually help prop up these struggling economies such as Portugal and Greece?

Robertson: Generally we find that machinery production typically reflects a nation’s economic performance. As mentioned before, machinery production tends to fluctuate higher and lower than GDP, but the correlation is still there. These countries aren’t particularly benefitting from strong exports to developing nations, and, of course, domestic demand is still very low, so there appears no reason why machinery output would prop up these struggling economies you mentioned.

CFE: Manufacturing has led the U.S. recovery, and machinery output clearly has been a big part of that. Has the machinery production been more for domestic consumption or for export, and do you expect that trend to continue?

Robertson: Indications are that this has been a result of increased exports, while domestic demand has remained sluggish. This is backed-up by the fact that the U.S. has seen fairly poor economic growth this year, while machinery and industrial production has remained more robust; this would point to exports playing a much bigger part in this recovery than domestic demand.

With manufacturing growth in the U.S. continuing to be weak, it looks unlikely that domestic demand for machinery will improve dramatically in the near future.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me