In depth: 2011 so far, according to Jason Speer

Plant Engineering asked Jason Speer, vice president and general manager of Quality Float Works, about productivity, manufacturing recovery, and the challenges he’s faced at his plant in 2011.

08/09/2011


Jason Speer, vice president, general manager, Quality Float WorksBeyond his role as vice president and general manager of Quality Float Works, Jason Speer also has extensive experience on the national level as a member of the U.S. Dept. of Commerce’s Small Business Advisory Board. Quality Float Works also was the 2008 winner of Plant Engineering’s Top Plant Award.

PE: What initiatives have you undertaken to get more productive within your own plant?

Speer: We have focused on doing what we do best and have outsourced other areas of production that take away added time and labor from being efficient in our production. This includes buying more finished materials and working with a local vendor to help produce some components used in our production line. Adjusting our operations in this manner has allowed us to be much more cost-effective and run at optimal efficiency.

PE: What’s been the biggest surprise in the manufacturing recovery so far?

Speer: “Just in time” deliveries are the new normal. Every customer wants to make an order last-minute with a scheduled delivery within a week of ordering. Most of what we do is custom, so this has presented a big challenge for us—it means holding more inventory in stock or producing parts we know some customers will need in advance.

I’ve also been surprised by how many markets are still woefully untapped. I recently got back from a trade mission to Iraq and was shocked at how much opportunity existed from a customer base that is experiencing great infrastructure needs and could really benefit from access to our products.

Opportunities also exist in Korea, Columbia, and Panama. The hurdles and delay surrounding the pending U.S. Free Trade Agreements with these countries is very surprising and disappointing. There is so much potential for the manufacturing sector to make gains by leaps and bounds if we have access and opportunity to tap into the global marketplace.

PE: What are the biggest internal obstacles to a successful manufacturing operation? What are the biggest external obstacles?

Speer: Our biggest obstacles internally come with managing an ever-changing production flow. We’ve seen ebbs and flows with the orders coming into Quality Float Works over the past few years, and it can be very difficult to manage and accurately forecast our purchasing and inventory control.

Externally, our biggest obstacle continues to be threat and implementation of new government regulations. We spend a great deal of time and energy working to stay on top of what is happening at both the state level and in Washington to ensure we are protected and in compliances with guidelines and rules.

Often times, small businesses like Quality Float Works can be a casualty of the process by over-regulation and rules meant to impact only publicly traded companies. However, if we are part of those larger companies’ supply chains, we get lumped into the same compliance requirements—costing us added time, energy, and expense we do not have.

PE: You see successful manufacturing operations all the time. What characteristics do they have in common?

Speer: The key shared characteristic of successful manufacturing operations comes down to good relationships with customers, vendors, and employees. Without this, you have nothing. There is also so much we can learn from others in the industry; there are multiple benefits that come from networking, on both a personal and professional level.

Networking is about building relationships; the practice is the foundation of good business and is definitely a two-way street. It is a great tool for sharing battle wounds and gaining new insight on how others in a shared industry have faced and overcome industry challenges. There is an undeniable benefit in learning how others in the same arena are achieving new levels of success.

In short, networking is the key to personal and professional growth—and instrumental to growing your bottom line. The primary benefits are seen by the growth of business, new opportunities, and filling a sales pipeline through reaching out to people and starting a conversation about shared interests.

Return to 2011 Mid-Year Report: Grading on the curve.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me