In depth: 2011 so far, according to Bob Spence

Plant Engineering asked Bob Spence, plant manager/operations for Schneider Electric, about productivity, manufacturing recovery, and the challenges he’s faced at his plant in 2011.

08/09/2011


Bob Spence is the plant manager/operations for Schneider Electric’s plant in Lexington, KY. The plant manufactures electric distribution products, including safety switches.

PE: Everyone seems to feel the worst of the 2009 recession is behind us. In what ways has 2011 met or exceeded your expectations?

Spence: We are seeing some good growth in our core markets of both commercial and industrial construction. This includes some of our electrical distribution products, such as safety switches.

PE: Where are the warning signs? What still needs to be done?

Spence: Manufacturers need to be increasingly ready to compete in a global marketplace, where emerging powers such as China and India are making huge strides. As manufacturers face a shrinking talent pool of engineers and automation professionals, they must be able to do more with less.

Stagnation in the housing market is a chief concern. While low interest rates may drive modest commercial and industrial switch sales, the home consumer seems to be heeding the sluggish recovery more harshly. The job market must improve before consumers can commit to large, mostly financed purchases.

PE: What initiatives have you undertaken to get more productive within your own plant?

Spence: Lexington has worked hard to apply the Lean tools of the Schneider Production System (SPS). Our production groups conduct brief meetings at shift start to stretch and review safety concerns. Additionally, shift end meetings are conducted to review the daily barriers and compare group output compared to expected goals. Production barriers and their impacts are recorded by line leaders in a central database where downtime is pare-toed for analysis by the appropriate Value Stream Team (VST).

In addition, Lexington conducted four detailed diagnostics in 2006. These diagnostics focused on muda (waste) in the manufacturing processes and asked the question “What could we do if we had a blank sheet of paper for Lexington?”

The result was a complete re-layout of the facility to improve the process flow and reduce material handling. This re-layout was coupled with an innovative power and free conveyor system that now allows operators to fabricate a component and load directly to the automated paint process versus palletizing and handling. The re-layout and conveyor system also enabled multiple robotic load/unload applications throughout the plant that had not been possible with the previous monorail paint system. From 2009 to 2010, Lexington industrialized eight of these types of robotic applications. Two more are planned for 2011.

PE: You see successful manufacturing operations all the time. What characteristics do they have in common?

Spence:

  • Use of automation, robotics, and control technologies to make processes more efficient
  • Energy consumption reduced to cut operational costs and significantly improve the bottom line
  • Successful safety program
  • High level of visual management and 5S Management practices
  • High level of employee engagement via Idea Sharing (suggestion program), safety teams, continuous improvement events (Kaizen), and communication meetings (Short Interval Management)
  • Engaged plant leadership staff
  • Heavy emphasis on Lean manufacturing practices
  • Successful quality culture with employees and suppliers
  • Community and employee involvement/charitable activity involvement.

PE: What are the biggest internal obstacles to a successful manufacturing operation? What are the biggest external obstacles?

Spence: The internal obstacles are aging facilities, workforce development—there’s a lack of growth of the manufacturing industry talent pipeline, and knowledge retention. As our workforce ages, it is important to ensure we are transitioning the knowledge onto the next generation of workers. There also is cost management, continued pressure to hit productivity/improvement targets, and pressures on raw material pricing and subsequent effects on the bottom line.

The external obstacles include increasing external pressure for sustainable operations and competition from lower-cost locations within the company. We need to continue to perform, in all key metrics, at a high level, given the global scale of competition and comparison within Schneider.

PE: What’s your outlook for 2013?

Spence: An increased adoption of energy efficiency standards for industrial machines, more collaborative manufacturing environments (via cloud and web resources), which will lead to greater productivity, and continued growth in the commercial and industrial markets and increased recovery in residential market.

Return to 2011 Mid-Year Report: Grading on the curve.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me