IDC issues top 10 predictions for manufacturing 2008

Large manufacturers will move more assertively in 2008 toward constructing globally integrated business models, according to IDC Manufacturing Insights, the Framingham, Mass.-based market analysis firm. This trend tops IDC's annual top 10 predictions for how manufacturers will invest their IT budgets.

03/01/2008


Large manufacturers will move more assertively in 2008 toward constructing globally integrated business models, according to IDC Manufacturing Insights , the Framingham, Mass.-based market analysis firm. This trend tops IDC's annual top 10 predictions for how manufacturers will invest their IT budgets.

Manufacturers will augment their integrated business models by accelerating IT spend on collaborative decision process platforms, and on building stronger multienterprise business networks among partners.

According to Robert Parker, VP of research for IDC, “Today, 60 percent of revenues and profits come from outside the home country. Manufacturers need modular processes for modular products and markets, with the ability to mix and match processes to support products that will be more platform-based.



In manufacturing, says IDC’s Bob Parker, social network tools must be "goal-driven. It’s not just data warehouses and analytics. Analytics aren’t particularly good unless people can take action."

“When we talk about collaborative decision environments, this is not just data warehouses and analytics,” Parker continues. “There is an element of advanced analytics, but analytics aren't particularly good unless people can take action. We're talking about adding social network tools, but tools that are goal-driven.”

Amid concerns surrounding a recession, “The midmarket will have a hard year,” Parker says. “We'll see some manufacturers going into the bunker—certainly with construction materials—given how dependent they are on commercial versus residential.”

Here are IDC's remaining eight predictions for manufacturing:

  • Globally integrated business models will dictate that supply chain organizations reinforce fundamentals.

  • IT spending in supply chain will focus on fulfillment execution.

  • Product life-cycle management will become an enterprise strategy.

  • Product management software investments will be geared to integrating processes, not automating tasks.

  • For RFID, forget technology: Vendors must demonstrate business value now.

  • Your supplier's compliance problems will become your problems.

  • Manufacturers will address aging/workforces with investments in organic knowledge management.

  • Machine-to-machine technology will enhance service delivery.

    • “Our advice to manufacturers is to continue to look for ways to drive down costs, and accelerate investments that improve the speed of decision-making,” suggests Parker. “If you're an IT buyer, make sure you've allocated enough investment in emerging areas like machine-to-machine and RFID.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me