Hydrogenics completes fuel cell powered forklift pilot

11/03/2005


Hydrogenics Corp. announced the successful completion of forklift field trials at GM of Canada's car assembly plant in Oshawa and FedEx Canada's “mission critical” logistics hub at Toronto International Airport.

Hydrogenics designed, built and integrated fuel cell hybrid power packs to replace the lead-acid batteries in two Class 1 Hyster 5,500-pound sit-rider forklifts provided by NACCO Materials Handling Group. The forklifts were placed into service at two indoor multi-shift operations to showcase the technical readiness of Hydrogenics' fuel cell hybrid power pack and to verify the benefits and value propositions that can be offered to this market. In addition, Hydrogenics designed and built an indoor, PEM electrolyzer hydrogen refueler that was used to refuel the forklifts during the deployments.

"We gained real-world learning's for this near term application as our forklifts operated full-time for three months in rigorous operations, with virtually no maintenance downtime. Just as important, they finished the trials at the same high level of performance as they began," said Pierre Rivard, President and CEO, Hydrogenics. "By undertaking a project that demonstrated Hydrogenics' uniqueness in being able to deploy world-class technologies and products in both fuel cells and hydrogen refueling, we have shown the kind of “end-to-end” solution Hydrogenics can offer to OEMs and future users of this emerging technology."

Multi-shift indoor material handling operations face many challenges as a result of using forklifts that rely on lead-acid batteries. Battery management issues profoundly impact operations, including a marked decrease in forklift power prior to shift-end, loss of productivity due to battery change-out time and significant dedicated space and staffing for battery management. In addition, 24-hour operations require as many as three batteries per vehicle to cover the full shift rotation, contributing to ongoing capital cost infusions and battery disposal problems.

The field trials successfully addressed all of these battery limitations. Not only were the forklifts operating at full power at the beginning and end of each shift, they were also refueled by the forklift operators, as needed, in two minutes or less from Hydrogenics' indoor refueling station.

"Hydrogenics is now able to go to forklift manufacturers and customers and demonstrate that we have a materials handling solution that will start paying for itself over the total life of forklift ownership, through operational efficiencies, productivity increases and fast, reliable refueling,” Rivard said. “We know that materials handling operations are starting to understand and quantify the value that a 'fuel cell solution' offers today, boding well for the future as costs continue to come down. We see this emerging business as a substantial growth area for Hydrogenics over the next three years."

The multi-billion dollar annual forklift market is positioned as an early adopter of fuel cell technology. Initial adoption is anticipated in multi-shift indoor operations that deploy a fleet of material handling vehicles. This particular market, currently dominated by battery-powered electric platforms, is where Hydrogenics' fuel cell hybrid power pack can offer a viable 'plug and play' alternative. More than 300,000 new battery-powered material handling vehicles are purchased globally every year.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me