Hulit: Customer knowledge a key to success

02/14/2006


New Fluke president Barbara Hulit looks at some of the keys to innovation in her new role.

As the new president of Fluke Corporation, Barbara Hulit comes in from the outside, but with an insider’s knowledge of the company operations.

Over the past seven years, Hulit has worked with Fluke on identifying the company’s new indoor air quality and thermography businesses. In her new role, Hulit has responsibility for Fluke Industrial and Fluke Precision Measurement businesses. At BCG, she helped grow the global packaged goods sector by roughly 20% annually. Hulit holds an MBA from the Kellogg School at Northwestern University and a BA in Marketing from the University of Texas at Austin .

In a discussion with PLANT ENGINEERING , Hulit spoke about her new job, innovation, and her big events at the start of 2006:

Q: You're not unfamiliar with Fluke, but you come into this new role from outside the organization. What are your first priorities?

A: Myions will allow us to continue growing.This requires us to continue to build on a strong foundation by:

 

 

 

We are continually challenged to innovate and deliver the next great solution.Our customers have high expectations, and we remain committed to exceeding them.

Q: The thermography business has grown as more manufacturers place a higher priority on maintenance issues. How will this business continue to grow, both domestically and in emerging foreign markets?

A: There has been a significant shift from the "run-to-failure"e point that it needs to be serviced. With advances in technology and manufacturing, we can now offer full thermography packages (imager, software and training) for less than $10,000, a dramatic decrease in cost. These new imagers are designed specifically for industrial maintenance and are much simpler to use than traditional imagers. Our goal is to bring new capabilities to Fluke users with equipment that is easy-to-use, intuitive, affordable, and thus has a quicker payback.

This convergence of market forces, affordable technology and ease-of-use are driving the dramatic growth in thermography around the world. Thermography adoption is growing at a rapid rate as non-users find that there are innovative products available that now meet their needs.We don't see this slowing down anytime soon, especially in industrial maintenance.Fluke is putting a great deal of resources into our thermography business.We’ve recently added Infrared Solutions (ISI) to our organization. ISI has an impressive array of products and technology for a variety of markets. The Fluke ISI combination provides additional resources and capability to accelerate our innovation even faster.

Q: U.S. manufacturing. Where do we go from here? Are you optimistic about the future?

A: As you and your readers are well aware, the US manufacturing sector has undergone

Our parent company, Danaher Corporation, has brought us an expanded tool kit to assure that we have the best quality and service of any player in our market.We are making strong progress driving productivity enhancements through the Danaher Business System around the world.Those improvements allow us to make strategic decisions regarding our global manufacturing and service footprint. U.S. manufacturers who blindly move offshore or miss driving domestic improvements will lose over time.

Q: How do you drive innovation to find the next great idea out there?

A: Innovation is an easy thing to talk about, but it is difficult to do well. You can get a lot of bright, creative people together and come up with ideas for dozens of products and none of them will ultimately be successful.Why? Because they don't satisfy a customer need. The key to innovation at Fluke is understandingnd quite a lot of time “toe-to-toe” with our customers.We “shadow” them as they work, observing what they do.We seek to understand needs they can articulate, and those they can’t.Once we think we understand their needs, we develop a prototype then give it to them to use. And then we iterate.

We are always combing the globe for innovation, be it from an adjacent market, a completely different market, a partner, a user… our eyes and ears are always open.

Q: January was a good month for you -- a new job as president of Fluke and the Longhorns won the National Championship. Any parallels between the two?

A: Yes, it has been a very exciting month!Ater of truly great organizations from the inside.I’d put the Fluke team up against any team, but perhaps not on a football field!





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me