HUG: Next generation technology

Safety and security are two vital areas of coverage that can help manufacturers sustain operations at their plants heading into the future.

06/27/2012


ISS SourceSafety and security are two vital areas of coverage that can help manufacturers sustain operations at their plants heading into the future.

Technology advances will help companies achieve goals even though they will have fewer resources moving forward. That was just one of the points made at the Honeywell Users Group 2012 in Phoenix, Ariz. by new Honeywell Process Solutions (HPS) President Darius Adamczyk and Jason Urso, vice president of technology.

Just five weeks into his reign at HPS, Adamczyk said he is learning the automation environment, but he said he is looking to build upon two areas: Innovation and Services.

“I am a strong believer in having large investments in R+D,” Adamczyk said. “I believe it is the only way to sustain a business. I love the services business; we will continue to up our ballgame and grow or basic services.”

Part of growing the business is the enable users to push the envelope in productivity.

“You are expected to do more with less,” Adamczyk said. “We want to bring (users) innovations to be able to you squeeze more out of your operations. We want to be there for every phase of your business lifecycle.”

While Adamczyk gave his introductory overview, Urso talked about the nuts and bolts of Honeywell’s new technology offerings.

He introduced the next generation of Experion Process Knowledge System (PKS) called Experion PKS Orion that includes universal channel technology to remotely configure process and safety systems without the need for additional hardware and also adds virtualization.

The new systems just gained ISA Secure certification as what Urso said was the first distributed control system (DCS) to gain ISA99 certification.

“Universal Channel Technology simplifies engineering and configuration during the design stage of a project. It can lead to significant reductions in the total cost of ownership,” Urso said.

One of the advantages is the user can do away with the massive amount of wiring that continuously goes on throughout a plant. It can also allow for last minute changes in plan.

“It can adapt to wiring changes at the last minute,” he said. “Late changes can result on costly project delays.”

One of the other enhancements with Orion is a new Universal Safety Logic Solver, which is able to execute the safety application independently in a remote module, perfectly suited to geographically distributed installations.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me