How will high-speed data be moved around the car?

Internet systems in cars is becoming more and more competitive and the two systems, Ethernet AVB and MOST150, are competing for automotive companies' attention.

06/21/2011


Within the automotive camera module space two important trends can be identified; the first towards digital cameras and the second towards the use of megapixel technology. These trends prompt an important question: with all of this additional data being captured, how will it be moved at high speed around the vehicle? There are currently two potential solutions vying for supremacy - Ethernet AVB or MOST150. Each solution has its pros and cons, and each has influential companies backing it.

MOST150 is the third generation of the MOST Cooperation ‘standard’ for infotainment and multimedia networking in automotive applications, and is backed by major automotive OEMs, Tier 1s and component suppliers. Ethernet AVB has the support of the Avnu Alliance, which is backed by a group of well-known technology leaders, although few are out-and-out automotive suppliers.

The MOST Cooperation has, so far, made solid progress with MOST150, with the Volkswagen Group and Daimler announcing earlier this year the introduction of vehicles with MOST150. The Audi A3 will be first in 2012 and the Mercedes S-class will follow in 2013. The MOST Cooperation also has the advantage that hundreds of car models already use MOST25 and MOST 50; furthermore, MOST150 also supports Ethernet over a new packet channel.

So, does this mean the use of Ethernet AVB for automotive purposes is dead in the water? Not necessarily. The cost of using unshielded copper cabling is lower than POF, optical networks require skilled operatives to handle the sensitive interconnects, and some OEMs are rejecting the use of POFs because of problems when using them in small or restricted spaces. Furthermore, the potential bandwidth of Ethernet is higher than MOST150.

What Ethernet AVB needs at the moment is a major OEM to announce that it will be used in a new car model. That will give credence to the technology and mean that the automotive industry has two alternative technologies for the transport of high-speed data.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me