How to handle too much "socializing"

Each month, I look forward to reading the "Human Side of Engineering,'' and generally concur with the final decisions.

07/01/1998


Each month, I look forward to reading the "Human Side of Engineering,'' and generally concur with the final decisions. However, the situation of the inebriated engineer at a trade show ("When to clamp down on too much socializing," PE, February 1998, p 15), was entirely mismanaged.

For starters, if it was known that "Charlie liked his liquor," he should not have been in the Hospitality Room in the first place, or travel arrangements should have been made in advance. Even worse was that the supervisor noted that the employee was "flushed and unsteady" after having at least four drinks, then just stood by and watched the employee have two or three more.

Although I agree with the decision to insist that the employee not drive, the supervisor showed extremely poor judgement by condoning the actions of the employee without intervention until the situation was entirely out of control. -- David R. Gawelek, Plant Engineer, Traub Container, MacMillan Bloedel Packaging, Bedford Hts., OH

In "When to clamp down on too much socializing," I do not feel we are given enough information to adequately make a decision. Some questions need to be addressed.

What sort of an employee is Charley? Is he a good, highly productive one, or one that has just been getting along by the skin of his teeth, and skating on thin ice for quite some time? Or does his supervisor have some other ulterior motive for wanting to use this indiscretion to remove Charley from the payroll?

Did Charley create a scene? Was he an embarrassment before suppliers or customers? Is Charley a problem drinker with a history of this type of behavior or was it a one-time thing?

In this case, it doesn't seem to be the overimbibing that is the sticky point, but Charley's insistence that he drive himself home.

But firing Charley is not necessary, not will it have the desired result -- which is to keep an intoxicated driver off the road.

A better response would be to call in the local police, who would certainly have an interest in keeping Charley off the road. I had a similar situation in which the person in question would not give up his keys. The police were called, the officer admitted a field sobriety test, which the person failed miserably. Then the officer explained that he could not prevent the person in question for climbing behind the wheel, but if he did make it to the road, it was the officer's right and duty to enforce the law to stop him, and that he could, and would, be arrested for driving under the influence and be taken to jail. The person changed his mind. Firing was not necessary, and the situation was handled to the satisfaction of all those concerned. -- Jim Brown, Cinox Corp.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me