How often should PM strategies and tasks be reviewed?

The question is often asked "how often should PM strategies and tasks be reviewed?" Here are 3 processes an organization should have in place to support PM reviews.

06/29/2012



The question is often asked "how often should PM strategies and tasks be reviewed?" Here are three processes an organization should have in place to support PM reviews.

1. Root cause analysis (RCA) review: Each time an RCA is performed on failed equipment a review of the maintenance strategy should also be performed. The review of the maintenance strategy including the PM tasks should determine if a task exists that is supposed to prevent or identify early the incipient failure that ultimately led to the failure of the equipment.

If a task exists it should be determined if the task was performed properly. If the task was performed properly then the task should be changed as its ineffective. If the task was not performed properly then training should be provided to so that the task will be performed properly in the future. If no task exists then one should be developed and added to the PM procedure and the maintenance strategy updated.

2. Maintenance tech feedback: Feedback from the maintenance techs can be a valuable source of information. If the maintenance techs provide information or suggestions on how to improve a task it should be reviewed by the technical authority (discipline engineer) to ensure effectiveness.

3. Five-year PMO review: Industry best practice suggests that a formal review of all PM routines should take place every five years. The formal review is sometimes called PM Optimization. This is the minimum requirement in Marshall Institutes estimation.

- Some oil industry maintenance and integrity standards require a review every five years. Of course they use SCRM or derivative of it. Their standards for RCM are less rigorous than some industries like the nuclear power industry.

- John Moubray, author of RCM II, suggests a review every 12-24 months for critical equipment and up to three years for less critical.

- Anthony Smith, author of RCM: Gateway to World-Class Maintenance, recommends a first review at 18-24 months and then every three years after that.

- Steve Turner, well known RCM practitioner from aviation industry, and owner/creator of a preventive maintenance optimization process in Australia recommends minimum every three years.

- The Society of Maintenance and Reliability Professionals in the U.S. recommends every three years.

- Marshall Institute’s experience and observations of companies in industry suggests that a review every five years is the minimum for most equipment and operating contexts.

My key point is that maintenance strategies need to be reviewed periodically. If the organization understands the risks and has history to support their decisions they should be able to determine an acceptable frequency for reviews.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me