Hoisting innovation for safety, productivity and ergonomics

In this age where manufacturers constantly search for ways to cut costs while increasing production, initiatives such as Lean manufacturing, ergonomics and safety influence their needs. They demand tools that can accommodate multitasking, that are designed to handle product swiftly and securely without damaging it and protect workers from repetitive motion injuries, but also are built with oper...


In this age where manufacturers constantly search for ways to cut costs while increasing production, initiatives such as Lean manufacturing, ergonomics and safety influence their needs. They demand tools that can accommodate multitasking, that are designed to handle product swiftly and securely without damaging it and protect workers from repetitive motion injuries, but also are built with operator safety in mind.

“Across the board, customers tell us they want their material handling equipment to accomplish three major things: reduce product damage, protect their workers from injury and improve productivity,” said Jeff McNeil, marketing manager for Gorbel Inc. “They want to improve quality in their processes and reduce the number of people it takes to accomplish a task, but still make it a safe task for workers to complete.”

Clearly, Lean manufacturing and its methods for driving out waste are key to any manufacturer’s processes, and in turn, its capital investments. However, Lean is not the only trend driving innovation. Performance enhancements are also forcing suppliers to devise smaller, faster and more lightweight designs, according to Dan Senff, channel marketing manager for the Americas, ergonomic lifting and handling for Ingersoll Rand.

“Innovation is primarily being driven on performance enhancements, as well as driving cost out of the product,” Senff said. “Lean manufacturing principles are being embraced around the industry as the Lean culture not only eliminates waste throughout the process, but reduces lead time to market and eliminates unnecessary costs. Manufacturers also continue to focus on common platforms and common components, allowing them to leverage spend.”

McNeil added that technology’s role in these efforts is certain to continue. It is apparent in the arena of hoists and cranes that is the trend.

“Manufacturers continue to strive for continuous-duty lifting devices,” Senff said. “Many air hoists today are continuous-duty, but the industry has struggled to develop electric hoisting products to meet this requirement.”

Other trends

Other trends that continue to emerge are variable-speed devices and wireless interfaces.

“Variable speed technology in electric hoists continues to evolve as end users require the ability to infinitely control the speed at which they operate loads or material,” Senff said. “Wireless technologies continue to evolve as more and more end users require the ability to control loads but not be 'tied’ to the hoist or crane they are operating.”

Many of the innovations being incorporated into these devices are being added in response to user need for flexibility. According to McNeil, manufacturers want solutions that are applicable to multiple material handling tasks. This allows them to make the most of their capital investments.

“Flexibility is a huge concern for companies,” McNeil said. “That desire for flexibility is echoed in another trend we see: companies choosing high-tech, operator-guided handling equipment instead of completely automated equipment. Why?

“Completely automated solutions eliminate the need for a human to complete a task, but they cannot always respond to changes in process or hiccups in the cycle like a human can,” he continued. “More and more of these high-tech solutions are designed with built-in limits to the human operator’s range of motion, which protects the worker, the load they’re lifting and the surface they’re placing the load on.”

Helping out the bottom line

From capabilities and capacities to ergonomics and safety, innovations are being added to hoists and cranes to satisfy these needs while bettering the bottom line. In many cases, the improvement to the bottom line is significant.

“When looking at driving cost out of the product, manufacturers are focused not only on the material costs they can reduce, but also the overhead and labor content being added to the product,” Senff said. “Every dollar they can take out of the cost of the product shows up as a savings to the end user and/or increased profit to the manufacturer.”

“We see customers improving their bottom line every day by choosing better handling solutions,” McNeil added. “For instance, simply using a crane to lift a load that was previously being manually lifted can turn a three-person operation into a one-person operation.”

Many hoists and crane designs are equipped to bridge the gap between totally automated handling solutions and totally manual handling solutions.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me