HANNOVER MESSE: U.S. manufacturers urged to get into export business

Forum an outgrowth of President Obama’s National Export Initiative, which has the goal of doubling U.S. exports over the next five years

04/05/2011


Three years ago, just a handful of U.S. states came to Hannover, Germany looking for foreign business partners to work with. In 2011, a large-scale U.S. delegation was greeted by the U.S. Ambassador to Germany and high-ranking Commerce Department officials at the North American Export Initiatives Forum at Hannover Messe.

The goal of the forum was to highlight the efforts of both Hannover Messe and the U.S. government to bring more foreign investments to U.S. state and regional governments. Representatives of 21 states were on hand in Hannover to hear about the opportunities and challenges in securing foreign investment in their regions.

The forum was an outgrowth of President Obama’s National Export Initiative, which has the goal of doubling U.S. exports over the next five years.

U.S. Ambassador Phillip D. Murphy told the group on the fairgrounds that a number of agencies, including the Commerce Department and the group Invest In America, had programs in place to help make the connection with manufacturers looking to build plants in the U.S. as well as to assist U.S. manufacturers looking to export. “What they all offer are unique trade and investment opportunities,” Murphy told the group. “This is about more than what government can do. This is about what business can do.”

The speakers focused on the high level of innovation in U.S. manufacturing that can be exposed to the world state. “The power of U.S. entrepreneurship has no diminished. There is still a drive to pursue ideas that will solve the problems of the world,” said David Hanson, who heads the U.S. Department of Commerce’s Minority Business Development Agency.

Brian McGowan, the deputy Commerce secretary for economic development, said the growth of regional innovation clusters in the U.S. would create the environment for global business growth. “The key to national competitiveness is regional competitiveness,” said McGowan. “We need to create a regional ecosystem to support high-growth businesses.”

The majority of companies that do export in the U.S. do so to only Canada or Mexico. The opportunity to connect to foreign manufacturing is a primary goal of Hannover Messe, and show officials are focusing on attracting more U.S. attendees and exhibitors to Germany each year for the world’s largest industrial trade show.

- Edited by Gust Gianos, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me